Haicom HI-601VT User Manual - Operation Easy Manual
Operation Easy Manual
No pass code required mode
Press “5” to enter the emergency status
Press “8” to activate the bugging under none encryption mode saving mode
activated)
Press “ * ” to stop sending voice message back and hear “du du” responding
Press “ 0 0 0 0 ” (per-setted) and
hear a long “du” verifying the pass code confirmed.
Change the pass code by pressing “ 0 1234 1234 ” (example)
pass code correct: a long “du” and pass code incorrect: du 4 times “du du du du”
Set the first set dial-back telephone number: “ 1 0912 345678*”
Setup correct: a long “du” and incorrect: du 4 times “du du du du” (anti-thief alarm)
Set the second set dial-back telephone number: “ 2 0912 345678* “
Setup correct: a long “du” and incorrect: du 4 times “du du du du” (anti-thief alarm)
Set the third set dial-back telephone number: “ 3 0912 345678* ”
Setup correct: a long “du” and incorrect: du 4 times “du du du du” (anti-thief alarm)
Remove first set dial-back telephone number: “ 1 * ”
Remove correct: a long “du” and incorrect: du 4 times “du du du du”
Remove second set dial-back telephone number: “ 2 * ”
Remove correct: a long “du” and incorrect: du 4 times “du du du du”
Remove third set dial-back telephone number: “ 3 * ”
Remove correct: a long “du” and incorrect: du 4 times “du du du du”
SOS dial-back: 4, 5, 6 three sets
Press “ # ” to stop sending voice message back and hear “du du” responding
Press “ 0 0 0 0 ” (per-setted) and hear a long “ du” verifying the pass code
confirmed.
Change the PIN code by pressing “ 0 5678 5678 ” (example)
PIN code correct: a long “du” and Cancel PIN code by pressing “ 0 # ” and a long
“du” confirm it is correct
Press “ 1 ” for temporary disable tracking encryption mode under tracking encryption
mode.
21
21
HI-601VT