Haier 10518358 Use And Care Manual - page 11

10

11

To set the Timer for a 1-hour to 24-hour delay before the 

air conditioner is turned off (the air conditioner must be 

On):

1.    Press TIMER. Timer On indicator light on the air conditioner 

control panel will flash.

2.    Press the TEMP/TIME up or down arrow button to change the 

delay time from 1 hour to 24 hours.

3.    After 5 seconds, Timer On indicator light on the air conditioner 

control panel will remain on.

To set Timer to turn on the air conditioner, keeping  

previous settings:

1.   Turn on the air conditioner.

2.    Press TIMER. Timer On indicator light on the air conditioner 

control panel will flash.

3.    Press the TEMP/TIME up or down arrow button to change the 

delay time from 1 hour to 24 hours.

4.    After 5 seconds, Timer On indicator light on the air  

conditioner control panel will remain on.

To set Timer to turn on the air conditioner, changing the 

previous settings:

1.   Turn on the air conditioner.

2.   Adjust the mode to Fan, Cool, Energy Saver or Dehum.

3.    For Fan, Cool or Energy Saver mode, adjust the fan speed to 

High, Med or Low.

NOTE: In Dehum mode, the Speed button will not operate.

NOTE: Remote control may differ in appearance.

NOTE: One CR2025 battery (included) powers the remote  

control. Replace battery after 6 months of use, or when the  

remote control starts to lose power.

Press ON/OFF to turn on the air conditioner.

Press MODE to choose Fan, Cool, Energy Saver or Dehum.

Press SPEED to choose High, Med or Low.

Power

Temperature

Timer

■

    Press the TEMP/TIME up arrow button to raise the  

temperature. Each time you press or hold the TEMP/TIME up 

arrow button, the temperature will go up 1ºF  until it reaches 

86°F (30°C).

■

    Press the TEMP/TIME down arrow button to lower the  

temperature. Each time you press or hold the TEMP/TIME 

down arrow button, the temperature will go down 1ºF  until it 

reaches 61°F (16°C).

Mode

Speed

Using the Remote Control