Haier AB072FDAHA Instruction Manual - Operation Guide
1
2
3
4
10
5
6
7
8
9
MODE
REMOTE CONTROLLER
FAN
LOU
TEMP
TIMER
CHECK
FILTER
ON/OFF
Operation Guide
11
Operation
MODE button
TIMER button
Setting desired operation mode.
Setting time or continuous running
mode. In time running mode, time
power-on and power-off can be set.
Running indicator
It flashes after power is switched on
or reenergized after power failure.
During normal running, it stops
flashing and lights.
ON/ OFF button
The machine starts running after the
first press of the button and powers
off after the second press.
CHECK
Check failure code of
indoor or outdoor unit.
FAN button
Setting desired fan speed.
LOU button
Wind board will automatically swing
after press of this button during opera-
tion of the machine if the plate has
function of auto swing.
TEMP set button
Setting indoor temperature.
Set temperature to desired degree
within range of 18 C~29 C by
pressing this button.
TIMER button
Set time of time "power on" and
"power off" by pressing buttons.
AIR FILTER reset button
"FILTER" will be displayed when the
air filter of air-conditioner is dirty and
should be cleaned.Press this button to
clear "FILTER" display after cleaning.
Note
Running indicator goes out, display for LOU and running disappears while other displays still
remain if the machine is stopped.
Don't operate check switch except for check and repair of the machine.