Haier AB072FDAHA Instruction Manual - page 18
!
Adjustment of Wind Directions
16
To enhance heating and cooling effect, angle of air guarding plate should be set for heat operation and
cool operation respectively.
As a characteristic of air, the cold stays below while the hot on the top.
Air guarding plate should be in horizontal status during cooling program.
If wind blows downward during cool operation, there will be moisture condensation in outlet and on
surface of air guarding plate.
Air guarding plate should be in status of blowing downward during heat operation.
There will be great deviation in temperature of indoor air if wind blows horizontally during heat
operation.
Warning!
Four way cassette type
Adjust air guarding plate to horizontal
status.
In cool operation
Adjust air guarding plate to the status of
blowing downware.
In heat operation
Function of auto swing
Press ìLOUî button and air guarding plate will automatically run to further improve cooling or heating effect
if the front panel has the function of auto swing.
Two way cassette type
Adjust air guarding plate to horizontal
status.
In cool operation
Adjust air guarding plate to the status of
blowing downware.
In heat operation
Auto wind board
Press ìLOUî button and air guarding plate will automatically run to further improve cooling or heating effect
if the front panel has auto air guarding plate.