Haier AB142ACBBA Operation Manual - page 14
12
Guide to Operation
Timer On/Off
Before using TIMER function, calibrate the clock first (referring to page 4). When
you wake up in the morning, before going back to home after work or after going
to bed, you can let your air conditioner automatically turn on or turn off.
S
E
T
MODE
FAN
SWING
TEMP
CLOCK
SET
TIMER
SLEEP
RESET
FILTER
RESET
ON/OFF
1
2
4
AM
3
(4)Confirming your setting
After setting correct time, press SET button to
confirm "ON" or "OFF" stops flashing.
Time displayed: Unit starts or stops at x hour x min
(ON or OFF).Timer mode indicator lights up.
To cancel TIMER mode
Just press TIMER button several times until TIMER
mode disappears.
Hints
Wire controller possesses memory function, when use TIMER mode next time, just
press SET button after mode selecting if timer setting is the same as previous one.
After power failure, the clock should be calibrated again.
At this time the will flash.
OFF
or
ON
OFF
ON
OFF
12:00
12:00
12:00
12:00
A
M
P
M
A
M
P
M
TIMER ON TIMER OFF TIMER ON-OFF
BLANK
Operation mode will be displayed on LCD.
(except for Timer, Sleep, Swing)
(2)TIMER mode selection
Press TIMER button to change TIMER mode.
Every time the button is pressed, display changes
as follows:
Select your desired TIMER mode (ON or OFF)
(1)After unit start, select your desired
operation mode.
ON
(3)Timer setting
Press TIME button.
Every time the button is pressed, time increases
10min.If button is kept depressed, time will change
quickly.
Every time the button is pressed, time decreases
10min.If button is kept depressed, time will change
quickly. Time will be shown on LCD. It can be
adjusted within 24hours. AM refers to morning and
PM refers to afternoon.
A
M
OFF
ON