Haier AC282AFEAA Operation And Installation Manual - Operation
17
Operation
Timer ON - OFF Function
To cancel TIMER mode
Just press TIMER button several times until TIMER mode
disappears.
According to the time setting sequence of TIMER ON or
TIMER OFF, either ON-OFF or OFF-ON can be available.
(4)
Confirming the TIMER ON setting
After the time setting, press TIMER button to confirm.
Now stops blinking, while starts blinking.
ON
OFF
(6) Confirming TIMER OFF setting
After the time setting, press SET button to confirm, stops
flashing. Time displayed: Unit start or stop at x hour x min.
OFF
Set Clock correctly before starting Timer operation.
(1) Unit start
After unit start, select your desired operation mode.
Operation mode will be displayed on LCD.
(3)
Setting the time for TIMER ON
Press Timer button first, and then press / button.
Every time the button is pressed, the time increases by
1 min. If the button is kept pressed, the time will change
quickly.
Every time the button is pressed, the time decreases by
1 min. If the button is kept pressed, the time will change
quickly.
The time will be shown on LCD.
It can be adjusted within 24 hours.
AM stands for morning and PM for afternoon.
(5)
Setting the time for TIMER OFF
Follow the same procedure in "Setting the time for TIMER ON".
2
3
4
5
ON
OFF
TEMP
HEALTH
FAN
MODE
SLEEP
SWING
CLOCK
TIMER
SET
LOCK
LIGHT
RESET
HEAT
1
POWER/SOFT
6
AM
AM
(2) TIMER mode selection
Press TIMER button to select TIMER mode. Every time
the button is pressed, display changes as follows:
Select TIMER ON-OFF mode. will flash.
ON
Remote
controller
ON
ON
OFF
OFF
TIMER ON TIMER OFF
TIMER ON-OFF
AM
12:00
PM
12:00
PM
12:00
AM
12:00
BLANK
HEALTH AIRFLOW
FRESH
10
o
C