Haier AP96NACAEA Operation Manual - Others

1. Power supply

Air conditioner must use an exclusive line (over 30A)

When installation air conditioner in a wet place, try to use a circuit breaker against

Current leakage.

For installation in other places, use circuit breaker as far as possible.

Installation inspection and test run:

Please operate unit according to this Manual.

Items to be checked during test run. Please made a "   "in "   "

Are there any gas leakage?

How is insulation at piping connection carried out?

Are electric wires of indoor and outdoor unit firmly inserted into terminal block?

Is electric wiring of indoor and outdoor securely fixed?

Is draminage securely carried out?

Is earth line ( grounding ) securely connected?

Is power supply voltage abided by the code?

Is there any noise?

Is control display normal?

Is cooling operation normal?

Is room temp. regulator normal?

A

Flaring tool

Pipe dia.

Dimension A(mm)

Liquid pipe

12.7mm (1/2")

1.2 ~ 2.0

2. Pipe cutting and flaring

Be sure to carry out deburring after pipe cutting with a pipe cutter.

Insert flaring tool to make a flare.

Correct

Lean Damaged flare Crack

Partial Too outside

Incorrect

Such means for disconnection must be incorporation in the fixed wiring

The breaker of the air conditioner should be all-pole switch ; and the distance between

its two contacts should be no less 3 mm.

The parameter of power cord is over 2.5mm .

2

Others

27