Haier AW07LC2VHA User Manual - page 2
CONTROLLER FEATURES & SETTINGS
PAGE 2
ENGLISH
3
8
6
19
4
17
18
14
13
10
9
7
5
16
2
15
11
12
1
1
Power Button
Press the ON/OFF
button on the remote control to start
the unit.
2
TURBO/QUIET Button
The TURBO function is used for fast heating or cooling.
Press the TURBO/QUIET
button once and the remote
controlwilldisplaytheTURBO
icon on the bottom right
sideoftheremotedisplayandswitchtheunittotheTURBO
function.
TheQUIETfunctionmaybeusedwhensilenceisneededfor
fast rest or reading. Press the TURBO/QUIET
button
againtoswitchtoQUIETmodeandtheremotecontrolwill
display the QUIET
icon on the bottom left side of the
remote display.
Press the TURBO/QUIET
button a third time to cancel
TURBO/QUIET and return to normal operation.
Note:
TURBO/QUIETmodesareonlyavailablewhentheunitisun-
der cooling or heating mode (not for auto or fan mode).
Running the unit in QUIET mode for a long period of time
may cause the room temperature to not reach the set
temperature.Ifthisoccurs,cancelQUIETmodeandsetthe
fan speed to a higher setting.
3
COOL Button
InCOOLmode,theunitoperatesincooling.WhenFANis
settoAUTO,theairconditionerautomaticallyadjuststhe
fan speed according to room temperature. The
willbe
displayed during COOL mode.
4
HEAT Button
InHEATmode,warmairwillblowoutafterashortperiodof
the time due to cold-air prevention function. When FAN is
settoAUTO,theairconditionerautomaticallyadjuststhe
fan speed according to room temperature. The
willbe
displayed during HEAT mode.
5
DRY Button
DRYmodeisusedtoreducehumidity.InDRYmode,when
roomtemperaturebecomeslowerthantemp.setting+2°F,
unitwillrunintermittentlyatLOWspeedregardlessofFAN
setting. The
willbedisplayedduringDRYmode.
6
Temperature +/- Buttons
Temp+Everytimethebuttonispressed,thetemperature
setting increases.
Temp-Everytimethebuttonispressed,temperature
setting decreases.
Theoperatingtemperaturerangeis60°F-86°F(16°C-30°C).
7
AUTO Button
Underthemodeofautooperation,theairconditionerwill
automaticallyselectCool,Heat,orFanoperationaccording
to set temperature. When FAN is set to AUTO the air condi-
tionerautomaticallyadjuststhefanspeedaccordingtoroom
temperature. The
willbedisplayedduringAUTOmode.
8
FAN Button
Fan speed selection
Press the FAN
button.Foreachpress,fanspeedchanges
asfollows:
Remote control:
LOW
MED
HI
AUTO
Display
circulated
Theairconditionerfanwillrunaccordingtothedisplayedfan
speed.
WhenFANissettoAUTO,theairconditionerautomatically
adjuststhefanspeedaccordingtoroomtemperature.
9
Louver SWING Button - Vertical
Remote Controller