Haier HD80-26A Service Manual - 4.1.5 Function Button
-12 -
Service Manual
Model No: 26A SERIES
Issue
Rev.
4.1.5 Function button
7/8
Function and Selection button
There are 4 functions you can choose
Note: Not all the funcions can be selected for different program.
Delay function for delay start, turn the knob to theright to set time (in 1 intervals up
to 19 hours).The appliance shoule be finished in, after wardspress to start the
delayed operation.
Delicate function for delicate fabrics. It lowers the temperature and lengthens the
drying cycle time to take better care of the laundry.
Note: This function should be set after you have finished program selection,
other wisewhen you turn the knob, the function will be delected automatically.
Signal function, you can choose it as you need.
Function and Selection are a couple of buttons.They should be selected together.
Press the function button to select one function you need-corresponding indicator
icon is flashing,then press Selection button-corresponding icon lights up. You have
finished the function setting. Use the same method continue to select other function
as you need.
11 Timer button
Set timer program, the default time is 20 min,
turning the knob to the right to add the time and
left to subtract it. The shortest time is 10 min and
the longest time is 150min.
9 Dry level button
Press the button to set the final moisture content
of the laundry at the end of cycle.
Ready to iron.
10 Mode button
Press the button to set the drying mode after you
have selected one program.
12 M emo
Press the button for 2 sec to memory the cycle
you want, at the same time the indicator will
light up. The next time, when you want to use the
stored cycle you just only touch the emo button.
The indicator
lights up and the stored cycle is
Note: The laundry can be removed at any time during the anti-crease phase.
Anti-Crease function to lengthen the automatic anticrease phase at the end of each
program by 60 minutes.
activated.
Note: The “ Delay function ” can not be
memoried.
Extra dry.
Ready to wear.
To save enery during a prolonged drying time.
A balance of drying time and enery
consumpution between “ ” and
Cool air.
M
ECO
For drying in a shorter time at a higher level of
energy consumpution.
ECO
“ ”.
.