Haier HDB24EA User Manual - Troubleshooting

English

21

Troubleshooting

Dishwasher does not work

• Check if the circuit breaker needs to be reset or if the fuse needs to

be replaced.

• Check if the unit is in "OFF" mode.

• Check if the door is open. You may need to close the door properly.

Dishware and glassware/flatware are cloudy and not properly

cleaned

• Use of old or poor detergent. 

You need to make sure that detergent is fresh.

• The water may be hard in your area. 

You may need to install a water softener. 

• Spray arm may be blocked. 

You may need to rearrange dishware and utensils.

• Water pressure may be low.

You may need to adjust the water pressure. 

Make sure it is between 20 to 120 (PSI).

• Water temperature may be lower than what is recommended.

(120 Degree F / 49 Degree C) You may need to adjust the water

temperature on your water heater.

• Overloading of dishware.

You may need to rearrange or remove some dishware from the load. 

• (May have selected wrong cycle.) Inappropriate cycle selection.

You may need to select the proper cycle.

Dishes are not dry

• Low water temperature. You may need to regulate the water

temperature to 120˚F / 49˚C or select Heated Dry option.

• Make sure the rinse agent dispenser is filled and the proper amount

is used.

• Avoid nesting and do not overload.

• Load items in a tilted position if possible so the water will run off

easily.

• Dishware washed in higher temperatures will dry faster.

• Some plastic materials may need to be towel dried.