Haier HDY-HMS70 Operation Manual - Installation
a
b
c
Installation
Dimensions
a = 855 mm
b = 620 mm
c = 595 mm
Weight = 43 Kg
Packing accessories
Checklist of the accessories and materials provided with the machine:
Quantity
Installation
To ensure the dryer operates normally, attention must be paid to
the following instructions;
Ƶ
The dryer must be level when installed. Its bottom is equipped
with adjustable feet. Adjust these 4 feet to level the unit before
operation
˗
Ƶ
Check whether there is any damage to the dryer during
transportation. Any damaged dryer must not be used. if the unit is
damaged, contact your dryer supplier;
Ƶ
The dryer must be kept away from flammable substances
˗
Ƶ
The surrounding environment must be dry and ventilated;
Ƶ
To allow the dryer to perform better, the ambient temperature shall
not be lower than 10
ć
nor higher than 35
ć
Change the door-opening direction
If the direction of the dryer's door is not suitable to the location, its opening
direction may be changed. The procedure is as follows:
1. Unscrew the 4 hinge screws holding the door onto the machine
and remove the door.
2. Unscrew the door catch 6 and prise out the catch cover on the
opposite side of the door and transpose them.
4. Unscrew the door hinges and prise out the hinge covers on the
opposite side of the door and transpose them.
5. Remove the 4 blanking plugs from the screw holes on the machine
and insert them in the holes on the other side.
6. Refit the door on the opposite side of the machine.
Name
Owner's
manual
Certificate of
Conformity
Drainpipe