Haier XQG65-8SU User Manual - Maintenance
12
Maintenance
1. Turn off the water and
power supply after every
wash. Open the door to
prevent the formation of
dampness and odours. If the
washing machine is left idle for
a long period, drain any
remaining
water
in
the
machine and replace the drain
2. Unplug the machine during cleaning and
maintenance. Use a soft cloth dampened with
soapy water to clean the machine exterior and
rubber components. Do not use corrosive or
abrasive chemicals or solvents.
4. Cleaning the Filter (once a month).
5. To prevent the water
supply from being blocked
and impurities from entering
into the machine, clean the
water
inlet
and
filter
regularly.
7. If the washing machine
is left idle for a prolonged
period, turn off the water
and power supply and
open the door slightly to
prevent the formation of
dampness and odours.
6. If the appliance is to be moved any great distance,
replace the packing bolts which were removed during
installation. Proceed as shown below.
Remove the rear
panel.
Remove the rubber
plugs.
Insert the packing
bolts.
Tighten the bolts with the
spanner provided.
Replace the rear
panel.
This machine has a lint trap which is located behind
the removable front panel on the bottom right front
of the machine. To remove panel, pull the castor
levers out. Grip the sides of the front panel and pull
gently towards you. To remove the lint trap, turn
knob to counter clockwise position. this will unlock
the lint trap, to put it back, turn the knob to
clockwise position, this will lock the lint trap. To
replace front panel, line up the tabs on the panel
with the holes and push in gently. Release castor
levers.