- DL manuals
- Hoggi
- Mobility Aid
- BINGO
- User Manual
Hoggi BINGO User Manual
Summary of BINGO
Page 1
Bingo rehab pushchair user manual gb/us - partnering together to mobilize kids pacific rehab inc po box 5406 carefree az, 85377-5406 telephone: 888.222.9040 fax orders / inquiries: 480.575.7907.
Page 2
1 user manual for bingo rehab pushchair contents page 1 common information 1.1 preface ___________________________________________________________________ 2 1.2 application _________________________________________________________________ 2 1.3 declaration of conformity _____________________________...
Page 3
2 1 common information 1.1 preface thank you for selecting the bingo rehab puschchair. We have designed this high-quality product to make your life safer and easier, and we’ve included this manual to help you use and care for it. Please read the following instructions to make sure you use this produ...
Page 4
3 2 safety instructions 2.1 meaning of symbols caution! Warning of possible danger of accident and injury. Warning of possible technical damage. Information! About use of product. Information! For service-personnel. Attention! Read manual before use! 2.2 common safety instructions read manual comple...
Page 5
4 pay particular attention when on slopes and inclines to prevent - the child from falling out of the pushchair; - the pushchair from tipping over; - the pushchair from rolling away. If you have to park on a slope, face the pushchair uphill with the brakes engaged and ensure that the seat is in the ...
Page 6
5 the maximum load for the bingo street frame is 50 kg. The maximum load for the bingo seat unit is 35 kg. Accessories and add-ons reduce the maximum load proportionately. Attention! We recommend that, wherever and whenever possible, users transfer to the seats installed in the motor vehicle and use...
Page 7
6 3 delivery and preparing for use the original package contains the following components: • outdoor mobility base, folded; • seating unit, folded; • back insert • seat, back, hip and lateral padding; • instructions for use and list of tools required; • accessories as ordered. Carefully remove the t...
Page 8
7 • after setting the backrest to the desired position clamp it firmly with the clamping lever. By pulling the handle of the clamping lever backwards you can rotate it freely and find a optimal position to operate it. • to overcome the child protection pull the trigger outside first. • pull then the tr...
Page 9
8 • the allen wrench (size 4 mm) for this and for most other adjustments you can find mounted in the joint slider of the backrest • in addition to the clamping bolts, the back insert is fixed and secured by two carriage bolts with knurled nuts, which also limit the maximum back height. • it is recomme...
Page 10
9 • put the lateral upholsteries on the lateral brackets and connect the corresponding hook & loop straps. • pull the back upholstery with the cap onto the back insert. • connect the corresponding hook & loop straps to the back insert so that the shoulder belt slots line up with the upper edge (shou...
Page 11
10 to fold the bingo rehab pushchair proceed as follows: • stand behind the push bar. Pull both folding guards and push the push bar forward. • after disengaging the folding guards hold the upper part of the push handle and fold it forward until it touches the front frame and the pushchair is lying ...
Page 12
11 4.3 seat depth and seat width after loosening the knurled nuts underneath the seat you can adjust: • the seat depth by moving the knee angle assembly in or out . The minimum seat depth of 16 / 21 cm (6 - 8 inches) that you achieve is accomplished by taking out the four foam pads (access from unde...
Page 13
12 4.6 recline stand behind the seat first and put the wheel lock on. Secure the back with one hand before you operate the clamping lever with the other hand. Adjust the back to the desired position and tighten the clamping lever firmly again. 4.7 knee angle put the wheel lock on and stand in front of...
Page 14
13 4.10 footrest lock (optional) by pulling the release strap the footrest lock is disengaged and the footrest can be folded for better storage. If you swing the footrest down again, it will lock automatically. 4.11 detaching and attaching the seat unit for easier transport handling you can dismantl...
Page 15
14 before use in the reverse riding direction the base adapter must be rotated 180°. Remove all four bolts and rotate the base adapter. Tighten the bolts firmly again. 4.13 tilt in space the bingo seat unit can be tilted up to 45° in driving direction and 40° against driving direction in steps of 8,5...
Page 16
15 4.14 detaching wheels with quickrelease in order to achieve a most compact folding package the rear wheels of all models and the front wheels of the models with rigid front wheels are detachable by quick release hubs. To detach press the quick release spring towards the middle of the wheel and pu...
Page 17
16 5.1 swivel lock the swivel lock is mounted by the manufacturer or an authorized dealer. To lock the swivel lock turn the lock pin by 90° and let it engage in the designated hole in the castor fork. To open the swivel lock pull the lock pin, turn it by 90° so that it stays in the disengaged positi...
Page 18
17 if the storage bag gets overloaded the snap fasteners will open but can be put together again easily. If the seat unit is mounted against driving direction, the storage bag also is mounted in reverse direction. 5.3 headrest pads the headrest pads are mounted with carriage bolts and knurled nuts o...
Page 19
18 for a rough adjustment of the headrest width the self adhesive foam pads are glued to the left and/or the right of the headrest brackets. The cover is put on. After loosening the knurled nuts the headrest pads can be moved in or out for a fine width adjustment. The height adjustment is realized by...
Page 20
19 after reaching the desired position and tightening the wing nuts the back upholstery is pushed underneath the trunk pads. The angle of the trunk pad is fixed by tightening the clamping screw underneath the trunk pad cover. 5.5 lap belt on each end of the lap belt you can find pre mounted triglides,...
Page 21
20 5.6 five point harness the five point harness should be installed by authorized dealers or trained technicians. Take the seat upholstery off first. Loosen all the carriage bolts of the hip pads. Pull out the seat plate completely to get easy access to the set of rectangular slots in the seat plate ...
Page 22
21 mount the lap strap ends of the five point harness as decribed in 5.5. Lap belt and preadjust them roughly. To take the five point harnesss off proceed as follows: • press the red key on the buckle • press the keys of the length adjusters and pull the strap out so that approx 5 cm (2 inches) of the...
Page 23
22 5.8 frame padding fit the frame padding around the pushbar and close the hook & loop strap. Turn the hook & loop closure down and pull the frame padding down over the folding guard and front frame screw connection. Before folding the pushchair, lift the padding up until the folding guard is free....
Page 24
23 to put on the groin strap proceed as follows:: • place your child into the pushchair on the groin strap. • the part of the thigh belt with the buckle attached should lie on the pelvic bone. • insert the male part of the quick-release buckles located on the tensioning straps into the buckles on th...
Page 25
24 • hold the vest against the child’s chest and close the open quickrelease buckles. If required, re-tighten the individual fixation vest straps in the cam-lock buckles. • if required, re-tighten the individual fixation jacket straps in the cam-lock buckles. 5.11 chest-shoulder harness to attach the ...
Page 26
25 5.12 abduction block take off the seat upholstery to mount the clamping set. Insert the abduction block with its flat link through the slot in the front part of the seat upholstery into the designated rectangular slots (upper and lower!) in the very front of the seat plate. Clamp the abduction blo...
Page 27
26 trays must not be loaded with objects heavier than 5 kg (11 lb). 5.15 winter warmer zippers allow the upper part of the winter warmer to be opened or removed. Place the winter warmer in the stroller and tie with the straps to the lower back section and tie the upper straps to the frame of the bac...
Page 28
27 5.17 canopy with rain cover first attach the canopy adapters to the back frame on the left and right side. See also capter 3 “delivery and preparing for use”. Insert the male pins of the canopy into the canopy adapters. Adjustable ratchet joints are used to set the angle of the canopy. Spread the...
Page 29
28 adjustments: the attendant brake set is pre adjusted. Nevertheless, if adjustments become necessary just after installation or after a period of use there are following options: after loosening the counter nut at the brake cable switch the pre tension of both brake slings can be adjusted simultan...
Page 30
29 7 maintanance your bingo rehab puschair is ce approved. The manufacturer herewith guarantees that this medical product as a whole conforms to the requirements of 93/42/eec guideline. The rehab puschair should be checked for correct function before every use. The items listed in the following tabl...
Page 31
30 8 technical data dimensions cm (inches) and weight kg (lb) size 1 size 2 mobility base 3201-1000 rigid fr. Wheels 3203-1000 rigid fr. Wheels 3202-1000 sw. Fr. Wheels 3204-1000 sw. Fr. Wheels height push handle 77 -112 (30-44) 77 - 112 (30-44) overall width 63 (25) 68 (26.5) overall length mobilit...
Page 32
© hoggi gmbh 1910-0001-gb_06-2007 hersteller/manufacturer: hoggi gmbh taunusstrasse 17 d - 56235 ransbach-baumbach fon: (+49) 26 23 / 92 499-0 · fax: (+49) 26 23 / 92 499-99 e-mail: info@hoggi.De · internet: http://www.Hoggi.De.