HoldPeak 5040B User Manual - Volume Measurement
Volume Measurement
Press the “Area/Volume” button
twice, a symbol
will appear on
the screen which stands for volume, while one side of it keeps blinking.
Follow the instructions below:
Press the “Power on/Measure” button
to measure the 1st blinking
side(Length)
Press the “Power on/Measure” button
again to measure the 2nd
blinking side(Width)
Press the “Power on/Measure” button
again to measure the 3rd
blinking side(Height)
The meter will automatically work out the volume based on these 3
measurements and display it on the primary display area.
Press the “Power on/Measure” button
to delete the latest
measurement so you can take measurements again.
Pythagorean Proposition Indirect Measurement
This meter is capable of calculating the distances based on Pythagorean
Proposition. This function is designed for some special locations which are
inaccessible to the user. There are 3 measurement modes and you can press
this button
to switch between them:
once,a symbol
will appear on the screen
1》Press this button
with its hypotenuse blinking.