Holux GPSport 260 Quick Manual
GPSport 260 Quick Guide
1. Unit Overview
Buttons
Name
Icon
Function
Power button
Press to pause/ resume log when the device is turned on.
Press for 3 seconds to turn on/off the unit.
Backlight
Menu
Exit
Press for 3 seconds to turn on/off the backlight.
Return to main menu
5-Direction
OK
Use Left, Up, Right, and Down to select an option.
Press the OK button to confirm input.
2. Installing Bike Mount
(1)
Attach the bracket to the bracket holder.
(2)
Thread the two cable ties through the slots of the bracket holder.
(3)
Place the rubber pad under the bike mount and attach the bike mount securely to the bike stem
using the two cable ties.
(4)
Slide in the GPS on top of the bike mount until it snaps into place
3. Initial Setup
Users will be prompted with the Initial Setup for the first use of GPSport 260. Use the 5-direction button
to select your preference for language, unit, time format/zone, auto flip page, weight, and sport type.
If the GPSport 260 is reset, the Initial Setup will automatically start when users turn on the device.
4. Basic Operation/ Sport Mode
Once the device is turned on, the main menu appears. Select Sport Mode and the default first page for
Sport Mode appears Speed Meter. You are now on the Sport Page and are ready to use the basic
function of this device.
Main Menu
Sport Mode
Sport Page
Press the 5-direction button left or right to switch among pages with different sport information as
shown in the following. The Speed Meter page can be defined by user with preferred Top or Bottom sport
information. For detail, please refer to the user manual saved in the Tool CD that came with this device.
5. Starting/Stopping Logging
Auto-Start Logging
The GPSport 260 is set to automatically log your track once it is
turned on. To stop/ pause logging during activity, just press the
Power
button. The play icon “
” will be replaced by pause icon
“
” as illustrated.
Please note that the stop/pause is only functional in Sport Mode. If you are in the Follow Course mode, the
stop/pause function is disabled.
NOTES
1. Barometer calibration is set to automatically perform by default. Users can perform the barometer
calibration manually. Please refer to the section titled “Barometer Calibration” in the user manual for
details on setting.
2. When a warning icon
appears on the status bar
, it means the 3D
compass needs calibration. Go to 3D compass mode
to perform calibration.
3.
Do not charge the device at high temperature otherwise the charging may not be performed or the
lithium battery cannot be fully charged.
1.8’’ LCD screen
OK/ Up/ Down/ Right/ Left button
Backlight
Menu
Exit
Power/
Stop/Pause
Speed Meter Abbreviation List
ALT
= Altitude
AVG
= Average speed
BAR
= Barometer
CAL
= Calorie
DST
= Distance
KM
= Kilometer
KMH
= Kilometer per hour
MAX
= Max speed
MPH
= Mile per hour
ODA
= Odometer A
ODB
= Odometer B
SPD
= Speed
TIM
= Time
TOD CAL
= Today’s Calorie
VAR
= Variation