1. DL manuals
  2. HOLZTECH
  3. Planer
  4. SD-320 – 240V
  5. Instruction Manual

HOLZTECH SD-320 – 240V Instruction Manual

Manual is about: Planer-thicknesser

Summary of SD-320 – 240V

  • Page 1

    Planer-thicknesser sd-320 – 240v instruction manual db&s machines 4 e liniestraat 4 tel.: +32/51.70.54.66 b-8650 houthulst fax: +32/51.70.54.67 belgium e-mail: info@holztech.Com.

  • Page 2

    Holztech sd320 www.Holztech.Com contents 1.0 technical data 1.1 lay-out 2.0 safety precautions 3.0 safety devices 4.0 delivery contents 5.0 application 6.0 commissioning 6.1 cleaning 6.2 installation 6.3 electrical maan 7.0 workpiece data 8.0 operation 8.1 planing 8.2 thicknessing 9.0 planer knives ...

  • Page 3

    Holztech sd320 www.Holztech.Com 1.0 technical data overall length of working table 1500 mm planing width max 320 mm max. Clamping thickness for planing 5 mm groove feed - swivelling 90°- 45 groove feed – large 1100 x 150 mm table height 850 mm thicknessing table length 600 mm thicknessing table stro...

  • Page 4

    Holztech sd320 www.Holztech.Com 2.0 safety precautions 3.0 never operate this machine without the here prescribed safety and devices. • carefully observe the operation instructions. • during maintenance, reparation and inspection work switch off from mains. • always check safety devices before usage...

  • Page 5

    Holztech sd320 www.Holztech.Com 3.0 safety devices these machine safety devices are in accordance with the safety regulations of all eu countries. • knives protection covers for the knives shaft, delivered upon request. Grooves guide 45' swiveling for precise feed of the workpieces rebound tips. Ind...

  • Page 6

    Holztech sd320 www.Holztech.Com this machine is delivered in standard option. • delivery comprises: • cove for knives shaft • shavings retnever • stripped cutting knives - 4 pcs • groove guide • installation bolts - 4 pcs • switch plug combination for the motor brake • service kit • operation manual...

  • Page 7

    Holztech sd320 www.Holztech.Com 6.1 cleaning all blank parts that are protected against rust clean with petrol or similar commercial cleaning agent. Attention! Do not use any kind of nitro or similar solving agent, by no means use water. 6.2 fixing the machine must be placed vertically on adequate g...

  • Page 8

    Holztech sd320 www.Holztech.Com maximum slze is 1800 x 320 mm. For longer workpieces machining some sort of table extension is to be applied. Minitnal size is 450 x 50 x 30 mm. Smaller works to be machined using adequate auxiliaries. Thicknessing maximum size is 1800 x 405 x 230 nun. For longer work...

  • Page 9

    Holztech sd320 www.Holztech.Com 5. Do not push the workpiece with finger tips or hands. 6. For small workpieces apply auxiliaries 7.. Check up for defects (nails, knots, etc.) 8. When surface of job is uneven, begin with the side from which less material is removed. 9. By sudden fall of working forc...

  • Page 10

    Holztech sd320 www.Holztech.Com for small jobs always use auxiliary supports. Attention! The hands must never be placed on the knives shaft. The hand must always be behind the knives shafts and the right hand must push the workpiece till shortly before the shaft and then be withdrawn. The workpiece ...

  • Page 11

    Holztech sd320 www.Holztech.Com to avoid tensions when planing, work with smaller feeds and speeds and nicely sharpened knives. 8.2 thicknessing the thicknessing device comprises the following parts: • in going roller 0 • out going roller p • locker r • reboundlock q • knives shaft n • connecting le...

  • Page 12

    Holztech sd320 www.Holztech.Com for jobs longer then 1800mm, use table extensions. Observe jobs sizes as per art. 7.0 of this manual. 9.0 planer knives head 9.1. Removal of knives before dismantling the knives be sure to disconneet and switch off the electric supply. Tilt both working tables. Unscre...

  • Page 13

    Holztech sd320 www.Holztech.Com 9.2. Inserting and setting knives clean the following parts: - chutes of the knives shaft n - tapered tips (4) - springs (2) - connecting bolts (5) insert the tapered tips and the planer knives into the chute of the knives shaft and press them using wooden stick again...

  • Page 14

    Holztech sd320 www.Holztech.Com attention! - the knives may have maximum 1.0 mm height above theworking table. - the knives must be changed one by one. - do not use knives shorter than30 mm. - use only one-side sharpened knives otherwise rebound may occur. - carefully fix the connecting bolts. 10.0 ...

  • Page 15

    Holztech sd320 www.Holztech.Com at least once a month check chains tapered belts and when necessary reclamp. Motor - planmg shafts (belts) planing shaft - feed drive (chains) 10.3 checking motor brake the machine is equipped with electronic motor brake. The maximum time after switching-off the plani...

  • Page 16

    Holztech sd320 www.Holztech.Com functions of under voltage triggers at voltage drop in the factory the main switch goes off and the machine has to be switched on again. Electronic motor brake maximum run time of the motor is 1 0 seconds after switching-off the motor. In case this time gets longer an...

  • Page 17

    Holztech sd320 www.Holztech.Com 12.0 spare parts list pos. Number name pcs 1 adm 320.30.00.02 gulde port 1 2 adm 320.20.00.64 tpered washer 1 3 electric motor 1 4 adm 320.50.00.00 support 1 5 adm 320.30.00.17 guide strip 2 6 adm 320.30.00.18r thickness table 1 7 adm 320.30.00.20r roller 2 8 bds 8717...

  • Page 18

    Holztech sd320 www.Holztech.Com 17 dm5-321.20.00.47 nut 2 18 adm 4 10.20,00.01 port 1 19 dm5-321.30.00.26 scale 1 20 adm 320.30.00.25 indicator 1 21 dm5-401.30.00.28 support 1 22 adm 320.20.00.56 lever 1 23 adm 320.20.70.00 fleed lever 1 24 dm5-401.20.00.60 spring 2 25 adm 320.20.00.42 right camer 1...

  • Page 19

    Holztech sd320 www.Holztech.Com 72 adm 320.30.00.01 shaft 1 73 dm5-321.30.00.09 flange 1 74 adm 320.30.10.07 shaft 1 75 dm5-321.30.00.09 flange 1 76 krg 00.00-01 hand wheel 190 mm 1 77 k-p 00.04 bolt 1 78 400 b mp, mp 8/10 handle 1 79 dm5-321.40.10.18 bolt mp 8/10 1 80 adm 320.60.00.00 shield 1 81 a...

  • Page 20

    Holztech sd320 www.Holztech.Com.

  • Page 21

    Holztech sd320 www.Holztech.Com 13.0 guarantees 1. Guarantee period is 12 months from the date of delivery of machine. 2. Guarantee includes repair of all defects affecting functioning of the machine. 3. For guarantee claims please consult in writing your local dealer. 4. Guarantee claims are not ac...