HOLZTECH SD-320 – 240V Instruction Manual - page 4
Holztech SD320
WWW.HOLZTECH.COM
2.0 SAFETY PRECAUTIONS
3.0
Never operate this machine without the here prescribed safety and devices.
• Carefully observe the operation instructions.
• During maintenance, reparation and inspection work switch off from mains.
• Always check safety devices before usage.
• Safety precautions are as per operation manual.
• Operation with gloves is not allowed.
• After operation carefully clean from shavings and dust.
• Always keep the working table clean.
• Never clean machine with water stream either switched on or off.
• Before commencing operation remove from machine and working table all tools not
needed.
• Watch out for the machine to be in null position before mains are turned on.
• Prime to operation provide for professional electric wiring.
• Use this machine and tools for applications prescribed in this manual only.
• Maximum size of workpiece is prescribed in art. 7.0 of this manual.
• Never operate this machine in damp places, do not expose to rain or marginal
temperatures.
• Never leave the machine in operation without attention.
• Do not operate with wide clothes, long hair, rings, watches, etc.
• Tapered pieces are to be fed always with high feed.
• Operate the machine with protection shields installed.
• Always use protection glasses, mask or other prescribed safety devices.
• Keep away from children and observe that no children have access in factory.
• Youngsters under 16 must operate under authorized supervisor.
• When machine works under heavy duty shavings retrieving device should be used.
• Before operation workpleces are to be expected for defects, such as knots, nails, etc.
• Always replace cutting knives in set and never use knives less than 30 mm wide.
• Use one side ground knives only.
• When installing machine provide for lights free of screens and stroboscope effects.
• Machine is to be operated by authorized personnel well acquainted with this type of
equipment and posses all skills for the purpose.
• Provide the workplace with respective conununications.
Attention!
Non observation of the safety precautions or non prescribed operation may
provide for great danger for operator.