Home Automation 70A00-1 Operation Manual - Installing The Sim Card

Installing the SIM Card 

Caution: The C3 must be switched off before installing or removing 

the SIM card.  Do not install or remove the SIM card when the 

power is on; otherwise the SIM card may be damaged.  The GSM 

network cannot be used if the SIM card is damaged. 

1)  If applicable, remove the SIM card compartment door screw 

located on the SIM card door tab. 

2)  Open the SIM card compartment by pressing down on the SIM 

card door tab and removing the SIM card compartment door. 

3)  Open the SIM card holder by sliding the holder to the right and 

then lifting up the holder. 

4)  Slide the SIM card into the SIM card holder making sure that 

the notched corner of the SIM card lines up with the notched 

corner on the SIM card holder. 

OPEN

5)  Gently lower the SIM card holder and lock it in the closed 

position by sliding the holder to the left. 

LOCK

6)  Reinstall the SIM card compartment door using the screw to 

secure the SIM card door tab. 

6