Home Automation 70A00-1 Operation Manual - Receiving Calls

Receiving Calls 

When a call is made to either the landline phone number or the 

cellular number assigned to the SIM card, the connected phones 

will ring as normal.  Simply pick up a handset to answer the call. 

Ending Calls 

While on a call using either the landline or the GSM network, to 

disconnect the call, simply hang up the handset. 

Troubleshooting  

Symptom Problem 

Always hear busy 

signal when the 

phone is off-hook 

SIM card in not installed or the SIM card 

is not making a proper connection with 

the contacts on the SIM card holder. 

Can not connect 

with GSM network 

Reorient the antenna. 

Signal too weak at location. 

Signal Strength 

Indication is weak  

Reorient the antenna. 

Antenna is connected improperly.  

No dial tone 

Telephone line is improperly connected. 

Noise during calls 

Signal too weak. 

Unit unexpectedly 

shut down 

Unit needs to be rebooted. Switch off the 

power and wait a moment, then restart it. 

Echo during calls 

Change antenna location. 

Network problem.  Please consult with 

network operator. 

11