1. DL manuals
  2. Home Depot
  3. Grinder
  4. PS07214
  5. Assembly & Operating Instructions

Home Depot PS07214 Assembly & Operating Instructions

Summary of PS07214

  • Page 1

    Ps07214 4 1/2 inch angle grinder assembly & operating instructions read all instructions and warnings before using this product. This manual provides important information on proper operation & maintenance. Every effort has been made to ensure the accuracy of this manual. These instructions are not ...

  • Page 2

    General safety rules for all electric power tools read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. Recognize safety symbols, words and labels what you need to know about safety instructions warnin...

  • Page 3

    Important safety instructions work area keep your work area clean and well lit. Cluttered work benches and dark work areas may cause accidents or injury. Do not operate power tools in explosive areas, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ig...

  • Page 4

    Inhaling dust created as a result of construction projects could be hazardous to your health. Construction dust may contain chemicals, which are known to cause cancer, birth defects and other reproductive harm in the state of california. These chemicals could be, but are not limited to: lead from le...

  • Page 5: Service

    Follow these steps to maintain safe working conditions and good working condition of power tools. Improper care can result in electric shock or serious injury. • secure and support the work piece using clamps. Do not use your hands to hold the piece in place. • use the correct tool for the job. Usin...

  • Page 6

    Features specifications • rated voltage 120v / 60 hz • wheel size 4 ½” • 4.0 amp / 500 watt • speed 11,000 rpm ( no load) • 7/8 inch arbor package contents • angle grinder • one grinding wheel • wrench • handle • carbon brushes components observe the locations and functions of the various components...

  • Page 7

    Installing the grinding wheel improper installation of the grinding wheel and clamp nut can cause damage to the grinding wheel and grinder. Check to be sure the grinder is unplugged. Install grinding wheels by turning the grinder upside-down so the spindle faces up. Loosen the clamp nut with the wre...

  • Page 8

    Maintenance disconnect the power supply before cleaning. Wear safety eyewear before cleaning. Use compressed dry air to blow off dust and debris. Use a soft bristle brush if compressed air is not available. Applying excessive force to the tool can overload the motor, decrease the life and increase t...