Home Depot PS07214 Assembly & Operating Instructions - page 6
FEATURES
SPECIFICATIONS
• Rated Voltage
120V / 60 Hz
• Wheel Size
4 ½”
• 4.0 AMP / 500 Watt
• Speed 11,000 RPM ( No Load)
• 7/8 Inch Arbor
PACKAGE CONTENTS
• Angle Grinder
• One Grinding Wheel
• Wrench
• Handle
• Carbon Brushes
COMPONENTS
Observe the locations and functions of the various components and controls of this tool.
1
8
3
5
4
7
2
1)
Motor Housing
2)
Spindle Lock Button
3)
Trigger (not shown)
4) Handle
5) Guard
6) Grinding
Wheel
7)
Carbon Brush Housing
8)
Power Button
6
ASSEMBLY
Always use the side handle when operating the grinder. Using the grinder without the handle could result in lose of control, and result
in serious injury.
Always use the grinder with the wheel guard securely and properly installed. The wheel guard should always be placed between
the user and the grinding wheel. An improperly installed wheel guard could result in serious injury.
PS07214 4 ½ Inch Angle Grinder Assembly & Operating Instructions
6
Check to be sure the grinder is unplugged.
Both left-handed or right-handed users may use the grinder. Attach
the adjustable handle by screwing it tightly into the opposite side of
the grinder. Right handed users attach handle to left side (Figure 1).
Left handed users attach handle to right side.
Be sure the wheel guard is positioned between the user and the
grinding wheel (Figure 2).
Figure 1 Figure 2
Top view shows handle on Bottom view show proper
left side for right handed users positioning of wheel guard