Home Protector 4AHD Quick start manual - Power & Camera Connections
2
Power & Camera Connections
Connecting the cameras and power supply as shown in Fig. 2 below.
1. Connect the power adaptor [D] to the DC In socket [7 on Fig. 1] on the back of the DVR.
2. Connect the power socket on each 18m combined video/power cable [C] to one of the plugs
of the power power adaptor [D].
3. Connect the BNC plug on each video/power cable [C] to one of the yellow Video In (BNC)
ports [1 on Fig. 1] on the rear of the DVR.
4. Connect the other end of each combined video/power cable [C] to the camera cable power
and video connectors [B] repeat steps 2 & 3 for each camera.
5. When all other connections have been made plug the power supply into a 13A mains socket
and switch on socket.
A. DVR
B. Video cameras and connection cables x 4
C. 18m combined video/power cable x 4
D. 12V
𝌂
4A Power adaptor
E. Mouse (see Fig. 3)
F. HDMI cable (see Fig. 3)
G. RJ45 Ethernet network cable (see Fig. 3)
Kit Contents:
2
A
B
C
D
Fig. 2 DVR Power and Camera Connections