28 inch wide screen tft lcd monitor if281 user’s manual.
User’s manual 2 before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference. Fcc class b radio frequency interference statement this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part ...
User’s manual 3 table of contents safety notice ......................................................................................................4 precautions.....................................................................................................4 special notes on lcd monitors .......
User’s manual 4 safety notice 1. The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2. Shielded interface cables and ac power cord, if any, must be used in order to comply with the emission limits. 3. ...
User’s manual 5 special notes on lcd monitors the following symptoms are normal with lcd monitor and do not indicate a problem. • due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the power switch and then turn it on again to make sure the flicker disapp...
User’s manual 6 before you operate the monitor features • 28” wide screen tft color lcd monitor • crisp, clear display for windows • recommended resolutions: 1920 x 1200 @60hz • epa energy star ® • ergonomic design • space saving, compact case design checking the contents of the package the product ...
User’s manual 7 installation instructions install remove figure.1. Installing and removing the base installation: 1. Turn the monitor over and set it upside down. 2. Align the monitor to the slots on the stand. 3. Please note that the longer edge of the stand should be facing forward. 4. Securely mo...
User’s manual 8 making connections connecting to a pc: turn off your computer before performing the procedure below. 1. Connect one end of the d-sub cable to the back of the monitor and connect the other end to the computer’s d-sub port. 2. Connect one end of the hdmi to dvi-d cable (dual input mode...
User’s manual 9 connecting to a a/v device: connect a/v devices via the d-sub and audio line in connectors at the back of the monitor. 1. Connect one end of the d-sub cable to the back of the monitor and connect the other end to the d-sub to ypbpr adapter cable. 2. Connect the y (green) connector on...
User’s manual 10 adjusting the viewing angle 1. For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. 2. Hold the stand so you do not topple the monitor when you change the monitor’s angle. 3. You may adjust the monitor...
User’s manual 11 operating instructions general instructions press the power button to turn the monitor on or off. The other control buttons are located on the right side of the monitor (see figure 5). By changing these settings, the picture can be adjusted to your personal preferences. • the power ...
User’s manual 12 control panel button functions • power button: press this button to switch on/off of monitor’s power. • power indicator: blue — power on mode. Orange — power saving mode. • menu / enter: 1. Turn the osd menu on/off or return to the previous menu. 2. Exit osd menu when in volume osd ...
User’s manual 13 how to adjust a setting brightness/ contrast brightness adjust the brightness value of the display according to your preference. Select「brightness」option to adjust the brightness value. Contrast adjust the contrast value of the display according to your preference. Select「contrast」o...
User’s manual 14 h-position select the 「h-position」option to shift the screen image to the left or right. Enter the option and adjust the level. [for vga only] v-position select the 「v-position」option to shift the screen image up or down. Enter the option and adjust the level. [for vga only] clock s...
User’s manual 15 「 osd color」option under 「osd setting」menu, choose modes 1/2/3. System audio input while transferring via the hdmi port, it is recommended to set audio input to hdmi; if no sound is outputted, it is recommended to select audio input as pc, and make sure the pc audio output cable is ...
User’s manual 16 plug and play plug & play ddc2b feature this monitor is equipped with vesa ddc2b capabilities according to the vesa ddc standard. It allows the monitor to inform the host system of its identity and, depending on the level of ddc used, communicate additional information about its dis...
User’s manual 17 technical support (faq) q & a for general problems problem & question possible solution power led is not on *check if the power switch is in the on position *power cord should be connected no plug & play *check if the pc system is plug & play compatible *check if the video card is p...
User’s manual 18 no sound is outputted from monitor’s built-in speaker *make sure pc audio output cable is connected to screen's line in port (or audio in port). *make sure the sound volume adjustment can be clearly identified. *make sure the system > silence option in the monitor menu is on. *while...
User’s manual 19 error message & possible solutions cable not connected : 1. Check that the signal-cable is properly connected, if the connector is loose, tighten the connector’s screws. 2. Check the signal-cable’s connection pins for damage. Input not support : your computer has been set to unsuita...
User’s manual 20 34 1440x900@75 hz wxga+ 35 1600x1200@60 hz uxga 36 1680x1050@60 hz wsxga+ 37 1920x1200@60 hz wuxga (ypbpr mode) mode resolution 1 720x480i@60 hz 2 720x480p@60hz 3 720x576i@50hz 4 720x576p@50hz 5 1280x720p@50hz 6 1280x720p@60hz 7 1920x1080i@60hz 8 1920x1080p@60hz 9 1920x1080i@50hz 10...
User’s manual 21 appendix specifications driving system tft color lcd size 28” (27.5" viewable) lcd panel pixel pitch 0.309mm(h) x 0.309mm(v) h-frequency 24khz – 80khz video v-frequency 56hz– 75hz display colors 16.7m colors max. Resolution wuxga 1920 x 1200 @60hz plug & play vesa ddc2b tm on mode ≤...