I-Michealth HL168JC Instruction Manual - Note
Note
0197
This blood pressure monitor complies with the EC Directive and bears the CE mark
This blood pressure monitor also complies with mainly following standards
(included but not limited):
Safety standard:
EN 60601-1 Medical electrical equipment part 1: General requirements for safety
EMC standard:
EN 60601-1-2 Medical electrical equipment part 1-2: General requirements for
safety- Collateral standard: Electromagnetic compatibility- Requirements and tests
Performance standards:
EN 1060-1 Non-invasive sphygmomanometers - General requirements
EN 1060-3 Non-invasive sphygmomanometers - Supplementary requirements for
electromechanical blood pressure measuring systems.
EN 1060-4 Non-invasive sphygmomanometers - Test procedures to determine
the overall system accuracy of automated non-invasive sphygmomanometers.
Important/Caution/Note! Read the operating instructions.
Consult instructions thoroughly before use.
BF Classification:
- Internally powered equipment
- BF type applied part
- IPX0
- Not suitable for use in presence of flammable anesthetic mixture with air or
with Oxygen or nitrous oxide
- Continuous operation with short-time loading
To avoid inaccurate results caused by electromagnetic interference between
electrical and electronic equipments, do not use the device near a mobile phone or
microwave oven.
Discard the used product to the recycling collection point according to local
regulations.
HEALTH & LIFE Co., Ltd.
9F, No. 186, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan
EMERGO EUROPE
Molenstraat 15, 2513 BH, The Hague, The Netherlands
Phone: +31.70.345.8570 Fax: +31.70.346.7299
21