I thank you! We are grateful for your purchase of advanced wireless communications product. We believe this easy-to-use radio will provide you with dependable and reliable communications. This advanced wireless communications portable two-way radio is a precision device. Treat it with care, and you ...
Ii product safety and rf exposure for portable two-way radios compliance with rf energy exposure standards notice: this radio is intended for use in occupational/controlled applications where users have been made aware of the potential for exposure and can exercise control over their exposure. This ...
Iii fcc license information your advanced wireless communications radio operates on communications frequencies which are subject to fcc (federal communications commission) rules & regulations. Fcc rules require that all operators using private land mobile radio frequencies obtain a radio license bef...
Iv safety information: your wireless portable two-way radio has been designed using a low power transmitter. When the pttswitch is pressed, the radio generates radio frequency (rf) electromagnetic energy (eme). This radio is designed to comply with the fcc report and order fcc 96-326 (august, 1996)....
V contents thank you ...................................................................................................................... I fcc declaration ............................................................................................................. Ii – iv contents ..................
1 introduction advanced wireless communications is a leader in the design and integration of wireless communications solutions. Since 1992, we’ve been creating on site wireless systems that help businesses communicate effectively. Whether it’s a national chain of retail stores, a 50-story office tow...
2 transceiver radio view front view: 1. Headset connector connect headset for hands-free communication 2. 2.5mm jack 3. Ptt (push to talk) button press and hold ptt, transmit mode enabled. Release ptt, receive mode enabled. 4. Led indicator led indication and corresponding radio status as follows: r...
3 back view: 1. Belt clip used to clip the radio on your belt. 2. Battery door remove to access battery compartment. 3. Battery pack lithium 4.2v /1050mah rechargeable battery pack. 4. Charging battery contact charging battery cradle charger view 1. Battery slot charges battery 2. Charging indicator...
4 safety and care instructions safety precautions please observe the following safety precautions when setting up and using this product. • heat sources – keep the product away from heat sources such as radiators, stoves, heaters, and other heat-generating products. • water and moisture – do not use...
5 more information. When the battery power is low, red led will flash, please charge it or replace it with a new one. To charge the battery: tip charge the battery for 12 hours on the first charge. After that, it should take 4 hours or less to charge. 1. Plug the adaptor output into the socket on th...
6 features and operation turn the unit on / off note before using radio, confirm headset cable has been connected to the radio. To turn on radio: press and hold vol + “power on” will sound and green led light will appear confirming your action. To turn off radio: press and hold vol + until you hear ...
7 talk to another transceiver to transmit (make a call): press and hold ptt button, speak into the microphone using your normal speaking voice. Tip activate monitor function: to avoid interfering with other users, make sure the channel is idle before transmitting by pressing and holding the ch + but...
8 auxiliary functions time-out timer (tot) time-out timer prevents the prolonged use of the same channel and energy waste resulting from continued transmission. If the radio continuously transmits signals for a period over the preset limit (set by your dealer, max time is 5 minutes), the transceiver...
9 specifications operation frequency: 450-470 mhz channels: 16 max. (setting by pc programming) ctcss/dcs codes: 38 ctcss/ 83 dcs modulation: fm (narrow/wide deviation) sensitivity: -119 dbm ( -6 dbuv emf) noise squech: auto (setting by pc programming) audio output power: > 50 mw audio distortion: 7...
10 appendix frequency chart model: serial number: channel transmit frequency transmit ctcss/dcs receive frequency receive ctcss/dcs 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 advanced wireless communications endeavor to achieve the accuracy and completeness of this manual, but cannot guarantee its accur...
