I-Rad 420855102108 Manual - page 10
5
more information.
When the battery power is low, Red LED will flash, please charge it or replace it with a new one.
To charge the battery:
TIP Charge the battery for 12 hours on the first charge. After that, it should take 4 hours or less to
charge.
1. Plug the adaptor output into the socket on the rear side of charger.
2. The Desktop charger can charge both the radio and a separate battery.
3. The LED indicates the charging condition: one for radio unit, and another for separate battery.
LED MEANING
Green
No battery in the cradle
Unit / battery has been fully charged
Red
Unit / battery placed in cradle
NOTE
1. To maintain the battery life of your radio it is recommended that you only charge the battery
when needed. Overcharging the battery will reduce performance.
2. Ensure that the unit is turned off before charging.
3. Remove batteries before storing your radio for extended periods. Batteries corrode over time
and may cause permanent damage to your radio.
4. Please use the specified power adaptor within the same rating.
INSTALLING THE HEADSET
Insert the headset into the connection at the top of the radio.
Tighten the screw on the headset to secure it.
There is generally a PTT button on the headset.