I-SENS CareSens II Owner's Booklet - page 8

12

13

[7] Setting the Measurement Unit

The meter is set to mg/dL. Press the C

Button to change to mmol/L or return to

mg/dL. After selecting measurement unit,

press the M Button for three (3) seconds to

exit setting mode.

• Helpful Tip

The unit setting on the meter may be fixed for your meter, so that

you will not be able to change the setting.

[6] Setting the Year

Press the C Button until correct year appears. 

After setting the year, press the M Button to 

move to unit setting mode.

Setting the Year and Measurement Unit

[4] Setting the Hour

Press the M Button to move to hour setting

mode. Press the C Button until correct hour

appears. After hour is set, press the M Button 

to enter minute setting mode.

[5] Setting the Minute

Press the C Button until correct minute

appears. After minute is set, press the M

Button to move to year setting mode.

[3] Setting the Time

The meter can be set in an AM/PM 12-hour

or 24-hour format. Press the C Button to

select format.

Setting the Time