I-SENS CareSens II Owner's Booklet - page 9
14
15
[1]
Begin with meter off. Enter time and unit
setting mode (see Setting the Meter pages
10-13). Press the M Button seven times to set
meter to memory deleting mode. Press the
C Button to call up Yes or no.
[2]
To delete all memory, choose Yes. Press
the M Button. All past stored test results and
their dates and times will be deleted.
The number zero will appear.
Or, If you do not wish to delete the memory,
choose no. Press the M Button to enter
Step 1 of the time and unit setting mode.
• Helpful Tip
The meter will turn off if you press the M Button for more than
three (3) seconds at any stage of the setting. The meter will turn
itself off after two (2) minutes if the M Button is not pressed.
Deleting Stored Test
Results from Meter Memory
To delete all past stored test results, follow this procedure.
Storing Test Results in Meter Memory
• Helpful Tip
Each time you press the C Button, you’ll see previous test results,
dates and times displayed in chronological order. To see test
results displayed more quickly, press and hold the C Button.
[3]
Press the M Button to turn the meter off.
[1]
Press the M Button to turn on meter. The
current date and time will appear at the
bottom of the screen for two (2) seconds,
followed by the 14-day average and number
of tests performed.
[2]
Press the C Button. The most recent test
result, its date and time will appear.
The CareSens II Meter provides storage for up to
250 blood glucose test results. It also stores the
14-day average and number of tests performed.
The following procedure lets you store your test
results.