л чит т нич ю н льт цию. гл т чн . Б з вы дны www.Sotmarket.Ru д бн я инф м ция т в , тзывы, бз ы и ы Инструкция i-sotec i-soamp 4 Перейти в карточку товара 8 800 775 98 98.
The easy way to make it better . Manual the easy way to get more music! -4.
Congratulations on buying this i-sotec pro- duct and thank you for your confi dence in our products. With this i-sotec amplifi er you have acquired a technologically perfected and innovative product that will provide you with many years of excellent music enjoyment. We made special effor ts in the d...
Proper use and appliance as directed the i-soamp-4 is exclusively intended for operation in a motor vehicle with a 12 v automotive wiring system and on the original loudspeaker cable harness. It picks up the audio signals from the oem radio and feeds them amplifi ed to the car‘s loudspeakers. Instal...
1.1 connection diagram for i-soamp-4 wiring 1. Iso loudspeaker adapter (brown) on the car‘s cable harness (see the loudspeaker connection plan as well) 2. Iso power adapter (black) on the car‘s cable harness (see 1.5 as well) 3. I-soamp-4 with systemt plug connected 4. Iso loudspeaker plug (brown) o...
„normal“ loudspeaker connection plan 1. Iso loudspeaker plug on the radio 2. Iso loudspeaker adapter on the car‘s cable harness 3. 4-pin plug on the radio with factory settings 4. 4-pin plug on radio with factory settings 5. Connection plug on the i-soamp-4 1.3 front speakers + subwoofer in this var...
The selector switch is toggled to the „front + sub“ position in this system varia- tion. In that switch position the necessary active fi lters for the bass loudspeaker and the front speakers are automatically set. The level adjustment for the front loudspea- kers is done with the front level control...
1.4 four loudspeakers + optional subwoofer in this connection variation the front loudspeakers and the rear loudspea- kers are driven by one i-soamp-4. The bass loudspeaker is driven with another optional i-soamp-2. Due to increased power requirements from these two amplifi ers, it is ne- cessary to...
1.5 connecting the power supply the i-soamp-4‘s standard delivery is with an iso power adapter. Due to different connection pin confi gurations of different automotive producers for the 12v dauer- plus power voltage in the iso plug, the i-sotec power adapter has the capability to solve this problem....
Can connect the black „minus“ cable. Be sure to provide good electrical contact! Connect the other end of this cable to the black (-) clamp on the i-soamp-4 cable harness. The plug contacts needed for this comes as accessories. Keep all negative /ground cables in the system as shor t as possible and...
Warning: 1.) the fuse on the i-soamp-4 may only be replaced with the same capacity (20 a) in order to prevent damage to the appliance. Higher capacities can entail dangerous consequential damages! 2.) the i-soamp-4 can transmit higher output power to the loudspeaker than the original radio. Most lou...
3. Controls and connections 1. Undervoltage indicator (low batt.) yellow 2. Overheat indicator (temp.) red 3. Operating indicator (radio on) green 4. System plug for power, loudspeaker input / output 5. Front loudspeaker level control 6. Rear loudspeaker level control or sub- woofer control mode 7. ...
Liability disclaimer i-sotec does not assume any liability for damages that could be caused by improper use of the appliance, improper installation or incorrect connection as well as non-ob- servance of the handling methods described in these operating instructions. The appliance may only be operate...
л т з з любым д бным б м гл т чн я л жб дд ж и Д т в з з в в ии ф мл ни дит нл н з 2 мин ты м нии Д т в и л т вин и тзывы ции и ид и i-sotec i-soamp 4 Описание.
