I-Sotec i-soamp-4 Quick Manual - page 4
PROPER USE and APPLIANCE AS
DIRECTED
The i-soamp-4 is exclusively intended for
operation in a motor vehicle with a 12 V
automotive wiring system and on the
original loudspeaker cable harness. It picks
up the audio signals from the OEM radio
and feeds them amplifi ed to the car‘s
loudspeakers.
INSTALLATION
When installing, keep care that the i-soamp-4
is well ventilated. The amplifi er must not be
covered over or mounted in the vicinity of
other heat emitting objects or being ex-
posed to the direct effects of sunshine!
The i-soamp-4 can by itself heat up consi-
derably (up to 80°C), therefore care must
be taken to ensure distance to other heat
sensitive car components (in particular plas-
tic par ts and electronic components)!
For safety reasons, the i-soamp-4 must be
fi rmly installed in the car. Mount it with the
screws provided to a solid and appropriate
base. Do not drill holes in par ts of the car
if you do not know what is located behind
them. Be careful about cable harnesses
and fuel pipes!!
1. CONNECTION
The i-soamp-4 is connected directly to the
car‘s cable harness and to the original ra-
dio by means of an adapter. With vehicle
models without an ISO connection, an
adapter specifi cally customized for the mo-
del in question is required (ask your i-sotec
dealer for details).