I-tec Thunderbolt 3 User manual - English
5. Once the setting is completed, simply drag and drop the application icons or the opened
windows to the add-on monitor. However, some applications may not support to display on the
extended desktop.
Troubleshooting
Cursor disappeared – if the status remains in the extended mode but the docking station is
disconnected, the desktop will still be panned to the add-on monitor. The cursor may not be
found on the primary monitor in such a case. If it happens, connect the add-on monitor
through the docking station again or keep moving the mouse.
Video playback in extended mode – if the video or DVD playback quality is poor or low
performance in extended mode, please playback it on the primary monitor instead of the add-
on monitor.
Mirror mode
1. Refer to the Multi-monitor configuration section to bring up the configuration window.
2. Select the preferred monitor at top of the page.
3. Select Multiple Displays > Duplicate these displays.
4. Click Apply to confirm and exit.
Set the primary monitor
1. Refer to the Multi-monitor configuration section to bring up the configuration window.
2. Select the preferred monitor at top of the page.
3. Check the box of Make this my main display.
Note: For some computers, you may need to disable the main display by unchecking the box of
Extend the desktop onto this monitor or Extend my Windows desktop onto this monitor.
4. Click Apply to confirm and exit.
B. Mac OS
1. Click on the Apple sign at the top left corner of the screen and select System Preferences…/
Displays.
2. To rearrange the displays, drag them to the desired position.
To relocate the menu bar, drag it to a different display.
ENGLISH
i-tec Thunderbolt™ 3 Docking Station
EN
07