I-Tech RKP1015-1601 User Manual - 13. Faq

Other manuals for RKP1015-1601: Specifications, User Manual

Manual is about: 1U 15” / 17” Rackmount LCD Keyboard Drawer with USB KVM Switch

Page of 28

Download

Print this page

Bookmark us

Rev. : 1.0

P.25

13. FAQ

1. Don

’t press any keys on the keyboard while the selected

computer is booting up. Otherwise, it might cause the

keyboard error or keyboard is not detected at PC side.

2. The computer boot up fine, but keyboard doesn

’t work.

●

Make sure the keyboard works when directly plugged into the computer.

●

Try a different keyboard, but use only 101, 102 or 104-key keyboard.

3. The Mouse is not detected during PC boot up.

●

Make sure the mouse works when directly plugged into the computer.

●

Make sure the mouse is a true PS/2 mouse. A combo mouse will work just as long

as it is set for PS/2 mode with the correct adapter. Try a different mouse.

●

Avoid moving the mouse or pressing the mouse buttons when switching ports.

●

Avoiding switching ports during shutting down the PC process.

●

When you switch one PC port to another PC port, the best scan time setting need to

be set to 5 seconds or more. Normally, the VGA monitor change one resolution

mode to another will take one or two seconds. So, the scan time is not

recommended to below 5 seconds.

4. Sun Server connection problem.

PS/2 KVM switch are using standard PS/2 type keyboard, mouse and D-sub 15pin

VGA for connection. If you need to connect Sun Server to PS/2 KVM switch, you need

a separate converter kit.

5. Sun

– 31 Kit

●

Convert USB to P/S 2 Keyboard & Mouse.

●

New model Sun Micro Server are using D-sub 15 pin Standard VGA.

RKP1015 / RKP1017-801/1601

« ‹ Prev 22 23 24 25 26 27 28 Next › »

Summary of RKP1015-1601

Page 1
User manual rkp1015 / 1017 – 801/1601 1u 15” / 17” lcd keyboard drawer with ps/2 kvm.
Page 2: Table Of Content
Rkp1015 / rkp1017-801/1601 rev. : 1.0 p.1 1. Table of content p.1 2. Introduction p.2 3. Features p.2 4. Package contents p.3 5. Optional accessories p.4 6. Peripheral products p.4 7. Important safeguards p.5 8. Structure diagram p.6 9. Dimension diagram rkp1015-8/1601 p.7 rkp1017-8/1601 p.8 10. Lcd...
Page 3
Rev. : 1.0 p.2 rkp series is a combination of keyboard, mouse and monitor into a drawer, with features such as flip-up design, adjustable brackets, built in lcd osd to provide effective assistant for an administrator to control pc system. Rkp series provides cost effective for your limited it budget...
Page 4
Rev. : 1.0 p.3 4. Package contents before unpacking it is very important to locate the lcd keyboard drawer in a suitable environment. ● the surface for placing and fixing the lcd keyboard drawer should be stable and level or mounted into a suitable cabinet. ● make sure the place has good ventilation...
Page 5: Optional Accessories
Rev. : 1.0 p.4 rkp1015 / rkp1017-801/1601 5. Optional accessories 6. Peripheral products cd-6 / 10 / 15 6ft / 10ft / 15ft ps/2 3-in-1 cable ca-2 / 6 / 10 / 15 2ft / 6ft / 10ft / 15ft ps/2 3-to-3 cable sun-31 sun / imac usb to ps/2 adapter others video input 12v / 24v / 48v dc power kvm cable cascade...
Page 6: Important
Rev. : 1.0 p.5 please read all of these instructions carefully before you use the device. Save this manual for future reference. ● unplug the lcd keyboard drawer from the power outlet before cleaning. ● do not spray liquid cleaners or aerosol directly on the device. Wet a cloth with a neutral deterg...
Page 7: Structure Diagram
Rev. : 1.0 p.6 8. Structure diagram 1. Ps/2 keyboard 2. Aluminium front panel 3. Class a active matrix tft lcd panel 4. Rear metal case 5. Analog to digital signal converter board 6. Lcd inverter 7. Lcd membrane 8. Ball bearing telescopic slides 9. Adjustable mounting bracket 10. Kvm membrane & kvm ...
Page 8
Rev. : 1.0 p.7 rkp1015-8/1601 1u 15 ” lcd keyboard drawer with ps/2 kvm 9. Dimension diagram rkp1015 / rkp1017-801/1601 15 ” lcd.
Page 9
Rkp1017-8/1601 1u 15 ” lcd keyboard drawer with ps/2 kvm 9. Dimension diagram rkp1015 / rkp1017-801/1601 rev. : 1.0 p.8 17 ” lcd.
Page 10
Rev. : 1.0 p.9 lcd session rkp1015 / rkp1017-801/1601.
Page 11: Lcd Membrane Diagram
Rev. : 1.0 p.10 lcd membrane diagram left right exit menu/selection power main menu bright/contrast auto adjust phase/clock h/v position misc reset main menu bright / contrast ● to enter into the bright, black level & contrast sub-menu auto adjust ● to perform automatic optimisations of all function...
Page 12
Rev. : 1.0 p.11 bright / contrast 1. Brightness ● to perform brightness adjustment of the input rgb signal ● use the left & right button to adjust and button to “brightness” 2. Contrast ● to adjust the contrast level of the input signal ● use the left & right button to adjust and button to “contrast...
Page 13: Misc
Rev. : 1.0 p.12 misc 1. Information ● the first header row shows the current resolution setup ● the second header row shows the horizontal frequency of the current input signal ● the third header row shows the vertical frequency of the current input signal 2. Osd timer ● to modify the duration of th...
Page 14: Resolution Settings
Rev. : 1.0 p.13 resolution settings for microsoft windows step 1 – press right click on the desktop step 2 – choose “properties” step 3 – change the “screen resolution” step 4 – change the “screen refresh rate” 10. Lcd session rkp1015 / rkp1017-801/1601.
Page 15
Rev. : 1.0 p.14 10. Lcd session resolution settings for sun servers ● resolution configuration procedures should be run by qualified sun server administrator ● sun servers are using resolution at 1152 x 900 x 76hz. ● supported resolution mode for 15 ” lcd: ● 1024 x 768 x 70/75hz ● supported resoluti...
Page 16
Rev. : 1.0 p.15 kvm session rkp1015 / rkp1017-801/1601.
Page 17
Rev. : 1.0 p.16 11. Kvm session front view channel select button selected channel bank button bank no. Shift button online channel led indication selected channel - displayed channel on monitor & red in led. Channel select button - press to select channel from 1 – 8. Shift button - press & hold foll...
Page 18
Rev. : 1.0 p.17 rear view 11. Kvm session cascade port channel port dc power rkp101x-801 rkp101x-1601 dc power -connect to external 12v dc power adapter. Cascade port -connect to additional kvm switch for channel expansion. Channel port -connect to pc computer with cd-6 3-in-1 kvm cable. Rkp1015 / r...
Page 19
Rev. : 1.0 p.18 11. Kvm session installation steps before installation, please make sure all of peripherals and computers have been turned off. 1. Connect the 3-in-1cable with 2 mini-din 6-pin connectors and a hddb 15-pin connector to the computer ports. 2. Connect another end of the cable to kvm sw...
Page 20
Rev. : 1.0 p.19 11. Kvm session cascading using ca-6 ps/2 kvm cable to connect from bank 1 ’s “cascade port” to bank 2 ’s “console port”. After connected please press “bank” & “channel” button on the front of the ps/2 kvm switch to reset the ps/2 kvm switch. Ca-6 ps/2 kvm cable ca-6 ps/2 kvm cable b...
Page 21: Hotkey Command
Rev. : 1.0 p.20 1. The channels that have pc connected and it is switch on will have a green led on that channel. 2. The red led will indicate the selected channel. 3. 7 segments led will display the bank number. 4. Press channel button to select the channel. 5. Enter the password, default is “00000...
Page 22: Hot-Key Command Operation
Rev. : 1.0 p.21 hot-key command operation 1. Calling osd menu 2. Switch to previous port (powered on pc only) 3. Switch to next power on port (powered on pc only) 4. Switch to previous bank 5. Switch to specific port example : a) bank 1 port 4 b) bank 2 port 16 bank 1~8 no. 0 or 1 first digit of por...
Page 23: Hotkey Command Operation
Rev. : 1.0 p.22 hotkey command operation 6. Switch to next bank 7. Enable / disable beeper sound 8. Auto scan for powered on pc 9. Reset to factory default setting 10. Find port by name rom reflash f i n d : █ note: the default beeper function is on and beeper control is only for note: not available...
Page 24: Osd Structure Diagram
Rev. : 1.0 p.23 bank : 1 01 system 01 02 ® system 02 e 03 ® system 03 ® system 04 05 ® system 05 06 system 06 07 system 07 08 ® system 08 osd : 1 0 sec. Change password scan: 1 0 sec. Console on/off esc : quit enter :complete tab : next insert :edit á/â: select port pgdn/pgup: bank select 04 bank : ...
Page 25: Kvm Settings Session
Rev. : 1.0 p.24 12. Start up kvm settings session 1. Osd ● osd menu on screen time default is 10 seconds. ● it can be modified from 05 – 99 seconds. 2. Scan ● scan interval from one pc port to next pc port when applying auto scan, its default is 10 seconds. ● it can be modified to 99 seconds for max...
Page 26: 13. Faq
Rev. : 1.0 p.25 13. Faq 1. Don ’t press any keys on the keyboard while the selected computer is booting up. Otherwise, it might cause the keyboard error or keyboard is not detected at pc side. 2. The computer boot up fine, but keyboard doesn ’t work. ● make sure the keyboard works when directly plug...
Page 27
Rev. : 1.0 p.26 item specification kvm channel port rkp101x-801: 8 port / rkp101x-1601: 16 port kvm channel interface hddb 15 pin ps/2 keyboard: mini din 6 pin female ps/2 mouse: mini din 6 pin female vga : hddb 15pin female ps/2 keyboard: mini din 6 pin female ps/2 mouse: mini din 6 pin female vga:...
Page 28
Rev. : 1.0 p.27 print at 8/2004 14. Technical specification rkp1015 / rkp1017-801/1601 item lcd screen manufacturer lcd origin panel 15 ” tft 17 ” tft resolution 1,024 x 768 1,280 x 1,024 brightness 300 cd/m2 350 cd/m2 color 16.2 million 16.2 million contrast ra tio 450:1 350:1 view ing angle 140 ° ...