I-Trinetech MediaWalker 956 Quick Manual - page 3
of
11
2
-
Download and install MediaWalker App form Google Play or App
store.
Or scan the QR code to download and install the MediaWalker App.
Launch the MediaWalker App after installed.
Connect the power with MediaWalker 956 and switch the
power on. Wait until the MediaWalker 956 to send out a
"Welcome to…………" message, which indicates that
the system is ready.
Turn on your device such as iPhone, iPad, Android
phone and/or computer. Setup the WiFi on your device
and search for the AP with the SSID name:
“mw948X_XXXXXX”.
Default password is “12345678”.
It will show the AP connected if the connection is
successful.
For Android
For iOS