I WARM 760 Operation Manual - page 4
MAJ : 16.09.11
4
The displays animation confirms the settings made and the indicator will go back to the menu.
Using the up and the down arrow buttons to choose the subdivision Save settings and exit and
press the Menu button. The device now runs in its operating mode. This operating mode is
intended to continuously maintaining a comfortable room temperature as set by you. Now you have
the possibility to program the daily/weekly program modes according to your needs.
Daily program
The daily and weekly program assists you by creating a heating schedule in accordance to your requirements. Due to the
manifold options and the self-developing system the thermostat I-WARM 760© provides a selection, which characterizes a
perfect balance between heating comfort and energy efficiency. This mode allows the device to be set for a 7 day period from a
single input. This mode is the efficient way to save electrical energy when you need to maintain heating at a selected time of a
day rather than continuously. You can set multiple periods during the day, marked as comfort, in steps of 30 minutes. The
heating is off the rest of the day, and is marked as economy. Based on accumulated knowledge the thermostat will turn on the
heating before or at the end of the economy period so that the desired temperature will be achieved exactly at the set time. The
comfort temperature which is set in the main indication window, by using the selection buttons, are the same for all the comfort
periods, irrespective of the operation mode.
*Important: The manufacturer does not provide preset “comfort” periods in the daily mode. You have to set them first by
programming heating periods during the day, otherwise the heating will always be off. Further, your settings will always be used
in this mode until you change them.
Setting the daily program
To set the daily mode press the menu button to access the daily program, while the thermostat operates in the main mode.
Browse by using the selection
buttons to the subdivision
program setting then press the
menu button.
Then select the Program day item,
and press the menu button.
The submenu Program day appears. Activate is for starting the daily mode with prior set parameters.
The view item allows you to view the heating diagram without being able to edit it. The edit item
enables you to set a heating schedule (when this mode is first run) or to edit the existing one.
For convenient setting and viewing the schedules the device is provided with visualization, of
comfort and economy periods distribution during the day, as a graph. The graph is illustrated as a
time axis with the comfort periods marked, with a hatch, and the economy periods left blank. To
set/edit the daily schedule choose edit and press the menu button. The time axis for setting the
comfort and the economy periods appears. Moving along the time axis with the selection buttons,
you can set the comfort and economy periods using the selection (alternately switched) buttons in
the desired intervals. For example, you want to set the comfort periods from 7:00 to 9:30 (in the
morning) and from 19:00 tî 22:30 (in the evening). When you enter the edit submenu you can see
the first time interval (from 00:00 to 00:30).
Keep on pressing the selection buttons until you reach the interval you desire to set as comfort (e.g.
07:00– 07:30). Press the menu button to set this time interval as a comfort period
The interval will be displayed
as
a
economy
period
(hatched).
Keep on pressing the selection button
and the menu button together to
extend the comfort period to the time
interval 09:00– 09:30.
Keep on pressing the selection button until you reach the time
interval 19:00-19:30 while leaving the passing intervals as
economy. Press the menu button to set this time interval as a
comfort period.