I3 International Ax48DC2 Quick Start Manual - Quick Start Guide

QUICK START GUIDE

Page -3-

Ax48DC Covert IP Camera

Rev. 

160826

1.  Make sure that the latest version of GiPi updater is installed on your SRX-Pro 

Server. Once the latest GiPi updater has been installed, restart i3 SRX-Pro Server. 

Please go to www.i3international.com/software-downloads to download the most 

recent GiPi.

2.  Log In and go to the Setup -> IP Camera tab.

3.  Click the Search button to display connected Annexxus cameras on the network.

4.  Select the desired detected camera in the list and click Select.

5.  In the Select IP Camera window, enter your User Name and Password if you 

have changed your camera’s default password. If the camera’s credentials are still 

i3admin / i3admin, leave User Account fields blank. Click Add.

6.  The selected camera will be added to the IP Camera list and the live video image 

from the camera will be shown in the Preview window.

7.  Assign the IP camera to the SRX-Pro video channel in the Ch. In. column.

1.  Once the IP address of the Annexxus camera(s) has been changed, make sure you can 

connect to the camera(s) through Internet Explorer:

2.  Launch Internet Explorer by double-clicking the IE 

icon next to the desired camera in the ACT.           

The password window will be displayed.

3.  Enter the default camera User Name: i3admin and 

default Password: 

i3admin

4.  The camera will suggest that a stronger 

password be entered. Click 

OK in the pop-

up message window to enter a stronger 

password or click 

Cancel to keep the 

default password and see Live video.

5.  (Optional) If you have chosen to enhance 

your camera’s password by clicking 

OK, the camera’s User setup page will be opened 

automatically. In the User tab, select i3admin user, then click 

Modify. Enter a more 

secure password in the 

Password and Confirm fields following the password 

requirement guidelines shown on the screen. Click 

OK when done. Make sure to keep 

a record of your new password. Click 

Cancel to close Modify User window to close it.

6.  (Recommended) i3 recommends disabling Illegal Login feature on the first login. 

Go to Configuration > Security > Security Service tab. 

Uncheck the 

Enable Illegal Login Lock checkbox and click Save.

7.  Click Live View.

8.  Click Allow in the browser add-on message at the bottom of the screen.

9.  Click on the plug-in download message inside the Live View screen .

10.  Click Run or Save in the download confirmation message at the bottom of the screen.

11.  Launch the downloaded WebComponents.exe file and follow the installation 

instructions. Click 

Finish to close the final installation screen.

12.  The camera’s live video stream will now be seen in the Live View screen.

11.  Make sure the Default Account checkbox is checked off.

12.  Click Update. Then click Yes in the confirmation window.

13.  Wait a few moments for a successful confirmation message.

14.  Repeat Steps 9-13 for all detected Annexxus cameras in the ACT application OR 

Select multiple cameras (Ctrl + left-click) and enter IP range to assign IP addresses 

sequentially to the selected cameras.

View Camera in IE browser

13.  If you do not see the camera live video stream on the screen, 

call i3 International tech support for troubleshooting tips: 

1.877.877.7241

Add Ax48DC to SRX-Pro Server

8.  Your Annexxus camera is now connected to SRX-Pro Server and is ready to record. 

You may change resolution and frame rate for the Annexxus camera in the  

IP Camera tab menu or you may choose to configure the camera’s advanced 

settings through the IE browser.