I3 International Ax61 series Quick Start Manual
CAMERA PARTS AND DEFINITIONS
Quick Start Guide
3MP Network Dome Camera
Ax61/Ax62-series
SAFETY
When installing your Ax61/Ax62 camera be sure to avoid:
• excessive heat, such as direct sunlight or heating appliances
• contaminants such as dust and smoke
• strong magnetic fields
• sources of powerful electromagnetic radiation such as radios or TV transmitters
• moisture and humidity
• areas with mechanical vibrations
• fluorescent lamps or objects that reflect light
• unstable light sources as this may cause flickering
• temperatures below -10° Celsius or 14° Fahrenheit and above 50° Celsius or 122°
Fahrenheit
.
•
For more details on installation and operation, please refer to the CD
provided.
POWER SUPPLY
Ensure the supplied voltage meets the power consumption requirements of this camera
before powering the camera on. Incorrect voltage may cause irreparable damage to the
video camera and will effectively void the camera warranty.
PoE power is supported in the indoor (Ax61/Ax62D-series) and outdoor (Ax62V) installa-
tions.
CLEANING
• For maximum optical clarity, the camera dome or lens must remain clean. Use a soft,
dry cloth to remove finger prints or dust from the dome cover.
• Use a blower to remove dust from the lens.
• Clean the body with a soft, dry cloth. If it is very dirty, use a cloth dampened with a
small quantity of neutral detergent, then wipe dry.
• Do not use volatile solvents such as alcohol, benzene, or thinners, as they may dam-
age the surface finishes.
SERVICING
To avoid electrical shock and to preserve the product warranty, DO NOT disasemble the
camera. Refer servicing to qualified personnel only.
PACKAGE CONTENTS
In addition to this manual and a fully assembled camera, the dome camera packing box
includes:
(All Ax61/Ax62 series)
1. User Manual CD x1
2. Guide Pattern sticker x1
3. Flush Mount template (the box
lining) x1
4. Plastic Anchor x4
5. Hex key x1
6. Standard RJ45 Connector x1
7. Short RJ45 Connector x1
8. 2nd video monitor output BNC
cable x1
(Ax61D/Ax62D series only)
9. Flat Head Screw (Tapping Type) x4
10. Flat Head Screw (Machine Type 26L) x3
11. Rubber plug x8
12. NPT 1/2” Rubber x1
13. NPT 3/4” Rubber x1
(Ax62V series only)
14. Round Head Screw (Tapping Type) x4
15. Desiccant in a package x1
Note: Attach to the inside of the inner liner.
16. Rubber gasket x1
17. O-rings x4
i3-TRNG-CAMS-
Ax61/Ax62-QuickGuide
.indd
Rev.
141202
Lens Direction
Note: Mounting surface material
determines screw type. Refer to manual.
GUIDE PATTERN
6
M
ACCESSORIES (not to scale)
Ax61D/Ax62D series only
Ax62V series only
All Ax61/Ax62 series
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
User Guide
IP Finder
137mm
13
0m
m
63mm
84mm
63
m
m
1
1
2
3
4
5
6
a
b
a
b
d
c
c
d
17