I3 International C-AX401C1M User Manual - Mounting Installation
MOUNTING INSTALLATION
Step 6:
Align the notch with position
“P”. Rotate the cover clockwise
to lock the cover to the base.
Tighten the locking screw.
Step 7:
Turn on the Power
The camera has no main
power switch or button. To turn
the power on, insert the plug
of the power cord into a power
outlet. Turn the power on after
you have installed the camera.
Important
Check if the ceiling structure and material have a sufficient strength before installing
the camera onto a ceiling. If the amounting strength is inadequate, the camera will fall,
potentially causing an injury or a camera failure. The screws supplied as accessories
do not provide an adequate strength with some ceiling materials. For example, special
anchors are needed if the ceiling material is gypsum boards. Please consult the
building architects regarding ceiling structure and strength.
Step 5:
Adjust the view angle
Ceiling/Wall Mount Installation (Continued)
Monitor out
5