I3 International Veo17 User Manual - Veo17
Veo17
Veo17 Embedded DVR
Rev.
170119
Page 7
Smart Search
The Smart Search and Playback provides an easier way to find the relevant data. When the
smart playback mode is selected the system will analyze the video containing motion or
VA information, and mark it with green color on the playback process bar.
Select Smart from the search mode in the top left corner to open the smart search
window. Select the required channel from the channel list and select the date from the
calendar (Dates coloured blue contain data and those in Red do not).
Click the smart button on the tool bar at the bottom of the page to enter the Smart
Search mode.
Select which smart search for the system to perform from the Smart Search Toolbar.
Once one of the above search parameters are set click the search button on the toolbar
and the system will search the data for the selected day. The results of the smart search
will be displayed as a green bar below the regular blue progress bar.
Drag the green vertical line to find the smart event you are searching for. The time of the
playback will move faster through the progress bar in areas that do not contain data that
match the search parameters.
External File Playback
It is possible to search files that are not held on the internal storage drive. The files will
need to be held on an external storage device plugged into one of the two USB ports on
the back panel of the Veo17 machine. Select External File from the drop down menu in the
upper left corner of the display screen. The folders and files will be listed in the right-side
list. Click the play button to play the file in the display screen area.
Playback by System Logs
It is possible to play back by searching through the system logs of the Veo17. To access
the System logs open the
Setup Menu - System Maintenance - Log Information.
Click Log Search at the top of the screen. Set the Start and End Time and date that you
need to search and select the type of logs to be displayed There are Major logs which
one or all can be chosen from the drop down menu which include, All, Alarm, Exception,
Operation, and Information. There is a second extensive list of Minor logs. Deselect the
Minor Type check box to deselect all of the minor logs and check the individual minor logs
that need to be found. Click the search button at the bottom of the screen.
A list of all the logs that match the search parameters will open in the bottom half of the
screen. Any logs that contain video data for playback will have a blue play button on the
right side. Clicking this button will open a small window and play the video.
Additional Playback Functions
Playback Frame by Frame
Video files can be played one frame at a time in order to check image details on the video.
Reverse Playback
Reverse Playback is available for up to 16 channels simultaneously. To do so enter the
Search feature and select the channels from the channel list on the right side and select
the date from the calendar as you would the previous searches.
Click the reverse playback button and the video will play in reverse in the display window
Video Save and Backup
There are 2 ways of backing up data from the Veo17. The first method is accomplished
through the Search function. In most of the Search methods including Normal, Event, and
Tag Searches it is possible to create custom video clips and back them up to an external
USB storage device. A backup can not be made from within a Smart search. If something
is found through a Smart search that requires back up make note of the channel and date
and time and find the data through a Normal search to back it up.
Before you begin ensure there is a USB storage device connected to the USB port on the
back panel of the Veo17 machine. To back the files up utilize the toolbar in the lower left
of the screen. This toolbar is the same toolbar that contains the tools described under the
Tag Search section. Follow the steps for Search described above, Select the channel and
date and time. While performing a “Normal” search it is possible to back up clips from
one or more channels simultaneously.
Click the “Reverse” button will make the video play in reverse. The double arrows in
either direction will make the video speed up or slowdown just like when the video
is playing normally.
Click the “slower” button until the speed changes to Single Frame. Clicking the
pause button will advance the video one frame at a time.
Line Crossing Detection. Draw a line by clicking on the display screen for the end
points of the desired line. A pink line will be drawn on the screen.
Intrusion Detection. Click once for each corner of a quadrilateral to create a region
for intrusion Detection. Only one region can be set.
Motion Detection. Click and drag to remove areas of the screen from the detection
zone. The area of the screen covered in red grid patter will be the detection zone.
Clicking the red box will set the motion detection to full screen.
Once the video has been found a clip can be made and saved to an external
device. Use the Scissors icon to begin the clip. Either watch the clip until the end
of the desired event is located or use the “Ahead 30s” button or, drag the yellow
vertical line to the end point of the video and click the scissor icon a second time
to complete the clip.
Click the save button and the Backup window will open. The clip created in the
previous step will be in the list displaying the channel it came from, the Start and
End time of the clip and the size of the file.