I3International Veo 48016 Quick Operation Manual - page 4
4
VIEWING LIVE VIDEO
After logging in, you will be able to view live video from all connected cameras in a multi-screen view.
Where no camera is present, or where camera is out of order, blue screen will be displayed with text “NO SIGNAL”.
Call your installer for service if a previously working camera can no longer be seen in the Live view screen.
In the example below, no video signal has been detected for Channels 15 and 16.
To bring a specific camera screen into full screen mode, position your mouse cursor over the camera video stream on screen and double-click
the left mouse button. Repeat to return to the multi-screen mode.
Quick menu panel is displayed in the bottom of the screen. Note the Search and Archive buttons, which will be discussed in the following
sections.
Double-click on the screen to move between
multi-screen and Full Screen modes.
Use your mouse cursor
to double-click on
the camera view you
would like to see in
the Full Screen mode.