I3International Veo 48016 Quick Operation Manual - Step 3

8

ARCHIVING VIDEO FOOTAGE TO USB FLASH DRIVE OR  CD/DVD

To archive / save a video clip, follow the steps below.

Step 1.

Plug in your USB flash drive into the USB port on the front panel of the DVR, if using, OR

Press the CD/DVD eject button on the front panel of the DVR and insert a blank CD or DVD disk into the drive. Press the eject button again to 

close the drive.

Step 2.

In the Live Mode, use your mouse cursor to click

the ARCH icon in the Quick Menu panel.

ARCHIVING window will be displayed.

Step 3.

In the ARCHIVING window, use the mouse cursor to set 

the FROM time and date. This determines the start date 

and time of the saved video clip.

Step 4.

Use the mouse cursor to set the TO time and date. This 

determines the end date and time of the saved video clip.

Step 5.

Use the mouse cursor to click on the UP / DOWN arrows inside the DEVICE field.

Set the destination device to either DVDRAM to burn a CD/DVD or select the name

of your USB Flash drive to save the video clip to your USB drive.

Step 6.

Position your mouse cursor over the TAG NAME field, 

then use the on-screen keyboard to enter the tag 

name.

Step 7.

Select the cameras for backup. To select all video 

cameras for backup, use your mouse cursor to check 

the ALL checkbox. To save one or more cameras, check 

all corresponding camera checkboxes. In this example, 

only CH 5 has been selected for backup.

See the next page for further instructions

Step 3

Step 4

Step 5

Step 6

Step 7

Step 2

EXIT ARCHIVING SCREEN.

RETURN TO LIVE MODE.