IAdea XDS-101 User Manual - page 6
4
2.3. Connect the XDS-101 to your network
Determine a connection type
Wireless connection (built-in): The player will scan for wireless signals nearby during boot up. If the
network requires authentication, you will be asked to provide the password for access.
(OPTIONAL) wired connection: Attach the USB Ethernet Adapter accessory (sold
separately; part no. IAD-ACC-ITM-0019) to media player’s USB port and connect a LAN
cable to the adapter’s other end (RJ-45 port). REBOOT player to initialize the adapter.
Player IP address
You will also need an IP address for the player on your network. This could be set automatically
(DHCP) or manually (static IP):
1) DHCP – Automatically Assign Network IP Address
DHCP is enabled by default. You do not need to change the settings unless setting a static IP.
2) Static – Manually Assign Network IP Address
Move the highlight to “Static IP”
below, press “Space bar” on the
keyboard to fill in the star (*) at
the Static IP brackets, and press
“Enter” on the keyboard to select
Proceed to configure an available
static IP address. Please ask your
network administrator for
assistance if necessary
Highlight “IP configuration” and
press “Enter” on keyboard to