Xds-2370 hardware user manual.
I contents xds-2370 hardware user manual 0 1. Introduction 1 1.1. Package contents 1 1.2. Physical view and features 1 1.3. Installation 1 1.4. Setting up 2 2. Technical data 4 2.1. Specifications 4 3. Appendix 5 3.1. Osd menu 5.
1 1. Introduction this document describes the hardware of the xds-2370 1.1. Package contents 1.2. Physical view and features 1.3. Installation in some instances, due to major temperature deviation and change in elevation or environment, the signboard's glass panel might trap slight moisture and will...
2 3 adjust the stand to switch between portrait/landscape installation alternatively, user can rotate the screen to change its orientation follow the instruction as shown below: 1.4. Setting up using control buttons 1 to unlock the control button, press and hold up and down buttons for 10 seconds, o...
3 the osd menu 1 press menu button to access osd menu, please check appendix for full menu explanation factory reset by osd there are 2 methods to perform factory reset, below describes the step to reset by osd 1 unlock control button if it is locked 2 press auto button to access input source menu f...
4 2. Technical data 2.1. Specifications xds-2370 display 23” ips lcd panel 250 nits maximum brightness 1920x1080 panel resolution viewing angle (h/v): 178/178 video format support h.264 (up to 1080p,10mbps) vc-1 (up to 1080p,10mbps) mpeg-4 asp (up to 1080p,10mbps) mpeg-2 (up to 1080p,10mbps) popai s...
5 3. Appendix 3.1. Osd menu main menu item 1 st sub menu item 2 nd sub menu item description adjust range reset value luminance contrast n/a contrast 0-100 50 brightness n/a backlight adjustment 0-100 90 eco mode n/a brightness = 90, contrast = 50 adjustable standard standard mode brightness = 20, c...
6 user red red gain 0-100 the user r/g/b value (default is 50) will not be modified by reset function green green gain 0-100 blue blue gain 0-100 srgb n/a set color temperature to srgb n/a osd setup h. Position n/a adjust the horizontal position of the osd 0-100 50 v. Position n/a adjust the vertica...
