IAdea XDS-2370 User Manual - 1. Introduction
1
1. Introduction
This document describes the hardware of the XDS-2370
1.1. Package contents
1.2. Physical view and features
1.3. Installation
In some instances, due to major temperature deviation and change in elevation or environment, the
signboard's glass panel might trap slight moisture and will require at least 2-4 hours for the
condensation to evaporate prior to usage to avoid damaging the product.
Mounting with VESA compatible mounting interface
This smart signboard accepts a MIS-D100(100mm x 100mm) VESA-Compliant mounting interface, the
recommended screw is M4 x 9mm (excl. bracket thickness)
Installing the optional display stand
1
Place the display face down on a still surface, use clean cloth as cushion underneath is suggested
2
Place the stand on the mounting bracket and install the screw
Main Unit
Power Cord
(with select power plug)