IAME X30 SUPER 175CC Basic Manual - page 9
MAN-78
TECHNICAL DATA ENGINE SUMMARY TABLE
DESCRIPTION
DATA
NOTES
FUEL MIXTURE / FUEL
4,5 % OF OIL
98 RON
Oil CIK homologated
GEARBOX OIL
33 ml
advised:
EP 100
(WLADOIL
IAME GEAR OIL)
or motor oil SAE 30
OPERATING TEMPERATURE ENGINE
min.48°C / max.54°C
EXHAUST ANGLES TIMING REFERENCE
186°±2°
Feeler gauge 0.2x5mm
TIMING ADVANCE
22° fixed advance
COMBUSTION CHAMBER VOLUME
14.25 cm³
13.8 cm³ min.
SQUISH
0.95 mm
Measured with single
wire from 1.5mm
CORRECT MEASURE TIPS PISTON RING
0.40 ÷ 0.45 mm
installed in the cylinder
SPARKPLUG TYPE USE IN
STANDARD WEATHER CONDITIONS
NGK R6254E – 105
SPARKPLUG TYPE USE IN
RAIN ATMOSPHERIC CONDITIONS
NGK BR 10 EG
8
Caution should be taken when installing the spark plug. Always clean and inspect the spark
plug threads before installation. Always apply anti seize compound, grease or oil.
- NEVER INSTALL THE SPARK PLUG WITHOUT SOME LUBRICATION -
You should be able to freely turn the plug into the head using only your fingers to turn the
plug. Do not force the plug with a tool or damage will occur. After rotating the plug into the
head by hand only. Torque to 175-230 lbs-in (20÷26 Nm).