IBabyGuard Infant Snooze Baby Sleep Monitor User Manual - page 14
Copyright 2012 iBabyGuard International
www.iBabyGuard.com
7
Infant Snooze sensitivity
There are 3 sensitivity levels to select.
Press the sensitivity set button to toggle to the
preferred sensitivity level. The sensitivity level selected
is indicated on the top of the status screen as shown
(highlighted in red).
3 (High, Default)
2 (Mid)
1 (Low)
As your baby grows, there may be a need to tune the
sensitivity to maintain high accuracy sensing.
HINT:
When baby is moving extensively and the display does NOT show strong movement, set higher sensitivity. Set
lower sensitivity when baby is sleeping soundly and the display shows strong movement.
3. KEY FEATURES OF PARENT UNIT
3.1 Audio Monitor
Sound activity from your baby can be transmitted to the
Parent Unit
You can hear your baby activity sound via the speaker
outlet as shown.
3.2 Speaking to your baby
Parents / caregivers can communicate to your baby at
any time via the
Parent Unit
.
To talk to your baby,
Press & hold the TALK button while speaking
via the microphone on the bottom front of the
Parent Unit
.
The talk icon will pop up as shown when
TALK button is pressed.
Release TALK button when not speaking.
WARNING:
Sound activity from your baby is not transmitted when the TALK button is pressed.