1. DL manuals
  2. IBall Baton
  3. Wireless Router
  4. iB-WRA150N
  5. User Manual

IBall Baton iB-WRA150N User Manual - 1.3  Panel Layout

Other manuals for iB-WRA150N: User Manual
Manual is about: 150M Wireless-N ADSL2+ Router

Summary of iB-WRA150N

  • Page 1

    150m wireless-n adsl2+ router model no.: ib-wra150n user manual ver. 1.0.0

  • Page 2: Copyright & Trademarks

    Copyright & trademarks specifications are subject to change without notice. Is a registered trademark of best it world (india) pvt. Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or ...

  • Page 3

    Fcc rf radiation exposure statement this equipment complies with fcc rf radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. “to comply with fcc rf exposure complianc...

  • Page 4: Contents

    Contents package contents .......................................................................................................1 conventions.................................................................................................................1 chapter 1 product overview....................

  • Page 5

    4.7.3.2 static route ........................................................................................................................................................55 4.7.4 dns .....................................................................................................................

  • Page 6: Package Contents

    Ib-wra150n 150m wireless-n adsl2+ router - user guide package contents the following contents should be found in your package: ¾ one ib-wra150n 150m wireless-n adsl2+ router ¾ one power adapter for ib-wra150n 150m wireless-n adsl2+ router ¾ quick installation guide ¾ one rj45 cable ¾ two rj11 cables...

  • Page 7

    Ib-wra150n 150m wireless-n adsl2+ router - user guide chapter 1 product overview thank you for choosing ib-wra150n 150m wireless-n adsl2+ router. 1.1 overview of the router the ib-wra150n 150m wireless-n adsl2+ router integrates 4-port switch. The wireless-n router delivers exceptional range and spe...

  • Page 8: 1.2  Main Features

    Ib-wra150n 150m wireless-n adsl2+ router - user guide 1.2 main features ¾ complies ieee 802.11n wireless technology to provide a wireless data rate of up to 150mbps ¾ 3-in-1: one rj11(internet) line port, four 10/100m auto-negotiation (rj45) lan ports supporting auto mdi/mdix and wireless-n access p...

  • Page 9: 1.3  Panel Layout

    Ib-wra150n 150m wireless-n adsl2+ router - user guide 1.3 panel layout 1.3.1 the front panel the router’s leds are located on the front panel. Figure 1-1 the router’s leds and the wps button are located on the front panel (view from left to right). Name status description on power is on power off po...

  • Page 10

    Ib-wra150n 150m wireless-n adsl2+ router - user guide 1.3.2 the back panel the router's ports, where the cables are connected, and reset button are located on the back panel. Figure 1-2 ¾ line: connect to the modem port of splitter or to the telephone line. ¾ reset: there are two ways to reset the r...

  • Page 11: 2.1  System Requirements

    Ib-wra150n 150m wireless-n adsl2+ router - user guide chapter 2 connecting the router 2.1 system requirements ¾ broadband internet access service (dsl/cable/ethernet). ¾ pcs with a working ethernet adapter and an ethernet cable with rj45 connectors. ¾ tcp/ip protocol on each pc. ¾ web browser, such ...

  • Page 12

    Ib-wra150n 150m wireless-n adsl2+ router - user guide figure 2-1 7.

  • Page 13: 3.1  Tcp/ip Configuration

    Ib-wra150n 150m wireless-n adsl2+ router - user guide chapter 3 quick installation guide this chapter will show you how to configure the basic functions of your 150m wireless-n adsl2+ router using quick setup wizard within minutes. 3.1 tcp/ip configuration the default ip address of the router is 192...

  • Page 14

    Ib-wra150n 150m wireless-n adsl2+ router - user guide ¾ if the result displayed is similar to the figure 3-2, it means the connection between your pc and the router is failed. Figure 3-2 failure result of ping command please check the connection following these steps: 1. Is the connection between yo...

  • Page 15

    Ib-wra150n 150m wireless-n adsl2+ router - user guide figure 3-4 default settings: user name: admin password: admin ssid: iball-baton wireless mode: automatic (802.11b/g/n) ) note: 1) do not mix up the user name and password with your adsl account user name and password which are needed for ppp conn...

  • Page 16

    Ib-wra150n 150m wireless-n adsl2+ router - user guide figure 3-6 4. The connection type page will display. Here we select pppoe wan link type for example. Figure 3-7 5. Enter the username and password given by your isp and click next to continue. 11.

  • Page 17

    Ib-wra150n 150m wireless-n adsl2+ router - user guide figure 3-8 6. The following page will display. Keep the default settings and click next to continue. Figure 3-9 7. The wireless -- setup page will display. Click next to continue. 12.

  • Page 18

    Ib-wra150n 150m wireless-n adsl2+ router - user guide figure 3-10 8. You will see the summary screen below, click save/reboot to save these settings. Figure 3-11 9. Now, your adsl modem router has been configured and is rebooting. Please do not power off the router while it’s rebooting. After succes...

  • Page 19: 4.1  Login

    Ib-wra150n 150m wireless-n adsl2+ router - user guide chapter 4 configuring the router this chapter will show each web page's key function and the configuration way. 4.1 login after your successful login, you will see the nine main menus on the left of the web-based utility. On the right, there are ...

  • Page 20: 4.3  Quick Setup

    Ib-wra150n 150m wireless-n adsl2+ router - user guide figure 4-1 ) note: click the other submenus under the main menu device info, and you will be able to view the corresponding information about wan, statistics, route, arp and dhcp. 4.3 quick setup please refer to section 3.2 quick installation gui...

  • Page 21

    Ib-wra150n 150m wireless-n adsl2+ router - user guide ¾ restore pin - restore the pin of the router to its default. ¾ gen new pin - click this button, and then you can get a new random value for the router's pin. You can ensure the network security by generating a new pin. ¾ add device - you can add...

  • Page 22

    Ib-wra150n 150m wireless-n adsl2+ router - user guide figure 4-3 4.1.2 pbc(push button configuration) method-ii step 1: press the wps button on the front panel of the router. Step 2: for the configuration of the wireless adapter, please choose “push the button on my access point” in the configuratio...

  • Page 23

    Ib-wra150n 150m wireless-n adsl2+ router - user guide figure 4-5 4.1.3 pbc(push button configuration) method-iii step 1: keep the default wps status as enabled and click the add device button in figure 4-2 , then the following screen will appear. Figure 4-6 add a new device step 2: choose press the ...

  • Page 24

    Ib-wra150n 150m wireless-n adsl2+ router - user guide step 4: wait for a while until the next screen appears. Click finish to complete the wps configuration. The wps configuration screen of wireless adapter 4.2 pin method if the new device supports wi-fi protected setup and the pin method, you can a...

  • Page 25

    Ib-wra150n 150m wireless-n adsl2+ router - user guide c. Message will appear shown as above, connect successfully in the router wps link menu interface. 4.2.2 enter a pin from your device (method-ii) a. Login the web-based menu of the router and click wps link on the left of the main menu. Write dow...

  • Page 26

    Ib-wra150n 150m wireless-n adsl2+ router - user guide d. You will see the wireless configuration completed screen when the new device is successfully connected to the network. Step 1: keep the default wps status as enabled and click the add device button in figure 4-2 , then the following screen wil...

  • Page 27: 4.5  Network Settings

    Ib-wra150n 150m wireless-n adsl2+ router - user guide 4.5 network settings choose “network settings”, and you can see the submenus as shown in figure 4-7. Figure 4-7 4.5.1 wan choose “network settingsÆwan”, and you will see the page of wide area network (wan) setup as shown figure 4-8. Figure 4-8 th...

  • Page 28

    Ib-wra150n 150m wireless-n adsl2+ router - user guide figure 4-9 enter vpi/vci value and service category provided by your isp. Click next to enter the next step. You will see the figure 4-10. Figure 4-10 after choosing the proper protocol, enter the correct parameters supported by your isp. Enable ...

  • Page 29

    Ib-wra150n 150m wireless-n adsl2+ router - user guide if you select the protocol of ppp over atm (pppoa), you will see the figure 4-11. Figure 4-11 ppp username: enter your username for your pppoa connection to identify and verify your account to the isp. Ppp password: enter your password for your p...

  • Page 30

    Ib-wra150n 150m wireless-n adsl2+ router - user guide use static ip address: check this box to use the static ip address to dial. The default value is disabled. Enable ppp debug mode: check this box to enable the debug mode. The default value is disabled. Click next button in figure 4-11, and then y...

  • Page 31

    Ib-wra150n 150m wireless-n adsl2+ router - user guide ¾ ppp over ethernet (pppoe) if you select the protocol of ppp over ethernet (pppoe), you will see the figure 4-14. Figure 4-14 ppp username: enter your username for your pppoe connection to identify and verify your account to the isp. Ppp passwor...

  • Page 32

    Ib-wra150n 150m wireless-n adsl2+ router - user guide dial on demand: if you check this box, the internet connection can be terminated automatically after a specified inactivity period (inactivity timeout) and be re-established when you attempt to access the internet again. The default value of inac...

  • Page 33

    Ib-wra150n 150m wireless-n adsl2+ router - user guide figure 4-16 ¾ dynamic/static ip (1483 bridge) if you select the protocol of dynamic/static ip (1483 bridge), you will see the page as shown in figure 4-17. Figure 4-17 obtain an ip address automatically: this radio button is checked by default. Y...

  • Page 34

    Ib-wra150n 150m wireless-n adsl2+ router - user guide use the following dns server addresses: check this radio button then you can enter the primary dns server and secondary dns server. This is not recommended by default. ) note: 1) dhcp can be enabled for pvc in mer mode as wan interface if "obtain...

  • Page 35

    Ib-wra150n 150m wireless-n adsl2+ router - user guide figure 4-19 ¾ ip over atm (ipoa) if you select the protocol of ip over atm (ipoa), you will see the figure 4-20. Enter the parameters provided by your isp. Figure 4-20 wan ip address: enter the ip address provided by your isp. Wan subnet mask: en...

  • Page 36

    Ib-wra150n 150m wireless-n adsl2+ router - user guide primary dns server and secondary dns server. If you have any problems, please ask your isp for the information. ) note: 1) dhcp is not supported in ipoa mode. 2) changing the default gateway or the dns will affect the whole system. Configuring th...

  • Page 37

    Ib-wra150n 150m wireless-n adsl2+ router - user guide figure 4-22 ¾ bridging if you select the bridging protocol, you will see the figure 4-23. Click the next button. Figure 4-23 then you will see the figure 4-24. Click save to complete the configuration. 32.

  • Page 38

    Ib-wra150n 150m wireless-n adsl2+ router - user guide figure 4-24 ) note: after completing any setup, the new setup must be saved and the router must be restarted for the configuration to go into effect. Please click the save/reboot button to restart as shown in figure 4-25. Figure 4-25 ) note: all ...

  • Page 39

    Ib-wra150n 150m wireless-n adsl2+ router - user guide 4.5.2 lan choose “advanced setup→lan” menu, and you can see and configure the local area network (lan) parameters in the screen as shown in figure 4-26. Figure 4-26 ¾ ip address: enter an ip address for the router. Then you can access the web-bas...

  • Page 40

    Ib-wra150n 150m wireless-n adsl2+ router - user guide ¾ disable/enable dhcp server: disable or enable the dhcp server. Dhcp stands for dynamic host configuration protocol. The dhcp server will automatically assign dynamic ip addresses to the computers on the network. If you disable the server, you m...

  • Page 41

    Ib-wra150n 150m wireless-n adsl2+ router - user guide figure 4-28 3. Enter the mac address in xx:xx:xx:xx:xx:xx format and reserved ip address in dotted-decimal notation of the computer for which you want to reserve an ip address. ) note: the mac address and ip address added in figure 4-28 are used ...

  • Page 42: 4.6  Wireless

    Ib-wra150n 150m wireless-n adsl2+ router - user guide ¾ your pc's mac address - this field displays the mac address of the pc that is managing the router. If the mac address is required, you can click the clone mac address button and this mac address will be filled in the wan mac address field. Clic...

  • Page 43

    Ib-wra150n 150m wireless-n adsl2+ router - user guide figure 4-30 ¾ ssid: enter a value of up to 32 characters. The same name of ssid (service set identification) must be assigned to all wireless devices in your network. Considering your wireless network security, the default ssid is set to be (xxxx...

  • Page 44

    Ib-wra150n 150m wireless-n adsl2+ router - user guide ) note: limited by local law regulations, version for north america does not have region selection option. ¾ mode: select the desired mode. The default setting is 11bgn mixed. 11mbps (802.11b): select if all of your wireless clients are 802.11b. ...

  • Page 45

    Ib-wra150n 150m wireless-n adsl2+ router - user guide ¾ ssid(to be bridged): the ssid of the ap your router is going to connect to as a client. You can also use the search function to select the ssid to join. ¾ bssid(to be bridged): the bssid of the ap your router is going to connect to as a client....

  • Page 46

    Ib-wra150n 150m wireless-n adsl2+ router - user guide figure 4-31 ¾ disable security: if you do not want to use wireless security, select this check box, but it’s strongly recommended to choose one of the following modes to enable security. ¾ wep: it is based on the ieee 802.11 standard. If you sele...

  • Page 47

    Ib-wra150n 150m wireless-n adsl2+ router - user guide • type: you can choose the type for the wep security on the pull-down list. The default setting is automatic, which can select open system or shared key authentication type automatically based on the wireless station's capability and request. • w...

  • Page 48

    Ib-wra150n 150m wireless-n adsl2+ router - user guide ¾ wpa-psk/wpa2-psk: it’s the wpa/wpa2 authentication type based on pre-shared passphrase. • version: you can choose the version of the wpa-psk security on the drop-down list. The default setting is automatic, which can select wpa-psk (pre-shared ...

  • Page 49

    Ib-wra150n 150m wireless-n adsl2+ router - user guide figure 4-35 to filter wireless users by mac address, click enable. The default setting is disable. ¾ mac address: the wireless station's mac address that you want to filter. ¾ status: the status of this entry either enabled or disabled. ¾ descrip...

  • Page 50

    Ib-wra150n 150m wireless-n adsl2+ router - user guide 4. Click the save button to save this entry. To modify or delete an existing entry: 1. Click the modify in the entry you want to modify. If you want to delete the entry, click the delete. 2. Modify the information. 3. Click the save button. Click...

  • Page 51

    Ib-wra150n 150m wireless-n adsl2+ router - user guide 4.6.4 advanced choose “wireless→advanced”, you will see the screen of wireless advanced settings shown as below. Figure 4-37 ¾ beacon interval: enter a value between 40-3500 milliseconds. The beacon interval value indicates the frequency interval...

  • Page 52: 4.7  Advanced Setup

    Ib-wra150n 150m wireless-n adsl2+ router - user guide 4.6.5 statistics choose menu “wireless→wireless statistics”, you can see the mac address, current status, received packets and sent packets for each connected wireless station. Figure 4-38 ¾ mac address - the connected wireless station's mac addr...

  • Page 53

    Ib-wra150n 150m wireless-n adsl2+ router - user guide choose “advanced setup→nat”, there are three submenus under the main menu: virtual servers, port triggering and dmz host. Click any of them, and you will be able to configure the corresponding function. Figure 4-40 4.7.1.1 virtual servers choose ...

  • Page 54

    Ib-wra150n 150m wireless-n adsl2+ router - user guide • internal port end: the end number of internal ports. You can type a service port or leave it blank. • server ip address: the ip address of the pc providing the service application. • remote host: the pc can enjoy the service application. ¾ add:...

  • Page 55

    Ib-wra150n 150m wireless-n adsl2+ router - user guide 4.7.1.2 port triggering choose “advanced setup→nat→port triggering”, you can set port triggering on the screen (shown in figure 4-43). Some applications require that specific ports in the router's firewall should be opened for access by remote de...

  • Page 56

    Ib-wra150n 150m wireless-n adsl2+ router - user guide figure 4-44 2. Select the application from the drop-down list. If the list does not have the application that you want, select the custom application radio button, and type the name of the custom application in the text box. 3. Enter the trigger ...

  • Page 57

    Ib-wra150n 150m wireless-n adsl2+ router - user guide 4.7.1.4 upnp settings 4.7.2 quality of service choose “advanced setup→quality of service”, you can enable qos (quality of service) on the screen shown in figure 4-46. Qos helps to prioritize data as it enters your router. By attaching special ide...

  • Page 58

    Ib-wra150n 150m wireless-n adsl2+ router - user guide figure 4-47 click the add button in figure 4-47, and you can configure the qos queue entry on the next screen as shown in figure 4-48. Figure 4-48 ¾ queue configuration status: enable or disable the queue configuration. ¾ queue: select a qos queu...

  • Page 59

    Ib-wra150n 150m wireless-n adsl2+ router - user guide figure 4-49 click the add button figure 4-49, and you can configure the qos on the next screen. 4.7.3 routing choose “advanced setup→ routing” menu, you can see two submenus under the routing menu as shown in figure 4-50. Figure 4-50 4.7.3.1 defa...

  • Page 60

    Ib-wra150n 150m wireless-n adsl2+ router - user guide figure 4-51 ¾ enable automatic assigned default gateway - select this checkbox, and then the router will accept the first received default gateway assignment from one of the pppoa, pppoe or mer/dhcp enabled pvc(s). If this checkbox is not selecte...

  • Page 61

    Ib-wra150n 150m wireless-n adsl2+ router - user guide figure 4-53 4.7.4 dns when you select the connection type pppoe, pppoa or ipoa for wan configuration, you will see the dns menu in the web-based utility (shown in figure 4-54). It includes dns server and dynamic dns submenus. Figure 4-54 4.7.4.1 ...

  • Page 62

    Ib-wra150n 150m wireless-n adsl2+ router - user guide 4.7.4.2 dynamic dns choose “advanced setup→ dns→ dynamic dns”, you can see the dynamic dns screen, this screen allows you to configure the dynamic dns (shown in figure 4-56). The router offers a dynamic domain name system (ddns) feature. Ddns let...

  • Page 63

    Ib-wra150n 150m wireless-n adsl2+ router - user guide figure 4-58 if you want to make some advanced settings, click advanced settings button in figure 4-58 to go to the dsl advanced settings page as shown in figure 4-59. Figure 4-59 if you want to select the tone, click the tone selection button to ...

  • Page 64

    Ib-wra150n 150m wireless-n adsl2+ router - user guide figure 4-60 4.7.6 virtual ports choose virtual ports to enable or disable virtual ports configuration. 4.7.6.1 port mapping choose “advanced setup→virtual ports→port mapping” menu, you can view and configure the parameters in the screen as shown ...

  • Page 65

    Ib-wra150n 150m wireless-n adsl2+ router - user guide figure 4-62 2. Enter the group name and select interfaces from the available interface list and add it to the grouped interface list using the arrow buttons to create the required mapping of the ports. The group name must be unique. The max lengt...

  • Page 66

    Ib-wra150n 150m wireless-n adsl2+ router - user guide ) note: you could also use other vpn routers to set vpn tunnels with ib-wra150nib-wra150n. Supports up to 10 vpn tunnels simultaneously. Click add new connection in figure 4-63 and then you will enter the screen shown in figure 4-64. Figure 4-64 ...

  • Page 67

    Ib-wra150n 150m wireless-n adsl2+ router - user guide ¾ remote ipsec gateway address: enter the destination gateway ip address in the box which is the public wan ip or domain name of the remote vpn server endpoint. (for example: input 219.134.112.247 in device1, input 219.134.112.246 in device 2) ¾ ...

  • Page 68: 4.8  Security Settings

    Ib-wra150n 150m wireless-n adsl2+ router - user guide ¾ key life time: enter the number of seconds for the ipsec lifetime. It is the period of time to pass before establishing a new ipsec security association (sa) with the remote endpoint. The default value is 3600. ) note: if you want to change the...

  • Page 69

    Ib-wra150n 150m wireless-n adsl2+ router - user guide figure 4-67 setup an lan restriction rule: 1. Click the add button in figure 4-67, and you will see the next screen as shown in figure 4-68. Figure 4-68 2. Enter the filter name for the rule, it is exclusive and must be filled. 3. Select the prot...

  • Page 70

    Ib-wra150n 150m wireless-n adsl2+ router - user guide 4.8.1.2 wan restriction choose “security settings→ ip filtering→ wan restriction”, you can configure wan restriction rules on the screen as shown in figure 4-69. The wan restriction feature allows some ip traffic from wan to access some local add...

  • Page 71

    Ib-wra150n 150m wireless-n adsl2+ router - user guide ) note: when you add a wan restriction entry, you must configure at least one condition on the preceding screen except the filter name. If you leave protocol blank, it means that the rule is effective to all protocols, if you leave the source ip ...

  • Page 72

    Ib-wra150n 150m wireless-n adsl2+ router - user guide figure 4-73 to remove an existing entry, follow the steps below. 4. Check the remove box as shown in figure 4-71 in the entry you want to remove. 5. Click the remove button. 4.8.3 application filtering choose “security settings→ application filte...

  • Page 73

    Ib-wra150n 150m wireless-n adsl2+ router - user guide mac filtering global policy - the default setting is allow. • allow means that all mac layer frames will be forwarded except those matching with any of the specified rules in the following table. • deny means that all mac layer frames will be blo...

  • Page 74

    Ib-wra150n 150m wireless-n adsl2+ router - user guide 4.8.5 day & time restriction choose “security settings → day & time restriction” menu, you can configure the parental control rule in the screen as shown in figure 4-78. The parental control function can be used to restrict the time of internet s...

  • Page 75: 4.9  Diagnostics

    Ib-wra150n 150m wireless-n adsl2+ router - user guide 4.9 diagnostics choose “diagnostics”, and your modem will test your dsl connection. Then you will see the test results for the connectivity to your local network and your dsl service provider similar to the following page. Figure 4-80 4.10 system...

  • Page 76

    Ib-wra150n 150m wireless-n adsl2+ router - user guide figure 4-81 4.10.1 settings choose “system tools/maintenance→ settings” menu, and you will see the submenus as shown in figure 4-82. Figure 4-82 4.10.1.1 backup choose “settings→ backup” menu, and you can save the current configuration of the rou...

  • Page 77

    Ib-wra150n 150m wireless-n adsl2+ router - user guide 4.10.1.3 factory default choose “settings→ factory default” menu, and you can restore the configurations of the router to its factory default as shown in figure 4-85. Click the factory default button to begin restoring. Figure 4-85 4.10.2 system ...

  • Page 78

    Ib-wra150n 150m wireless-n adsl2+ router - user guide figure 4-88 ¾ log - check the disable radio button to disable the system log function. The default setting is enabled. ¾ log level - select the log level, then all the events above or equal to the selected level will be logged. ¾ display level - ...

  • Page 79

    Ib-wra150n 150m wireless-n adsl2+ router - user guide figure 4-90 ¾ inform: you can select the checkbox to disable or enable the inform interval. ¾ inform interval: type the interval time of your router contact with the acs. ¾ acs url: please accept this information from your isp. And through acs (a...

  • Page 80

    Ib-wra150n 150m wireless-n adsl2+ router - user guide figure 4-91 ¾ date: enter the date. ¾ time: enter the time. You can also select automatically synchronize with internet time servers to make your router synchronize its time with internet time severs. Figure 4-92 ¾ automatically synchronize with ...

  • Page 81

    Ib-wra150n 150m wireless-n adsl2+ router - user guide figure 4-93 4.10.6.1 services choose “access control→ services” menu, and you can enable or disable the services as shown in figure 4-94. Click save/apply to save your configurations. Figure 4-94 4.10.6.2 remote management choose “access control ...

  • Page 82

    Ib-wra150n 150m wireless-n adsl2+ router - user guide figure 4-96 to add a new entry, follow the steps below. 1. Click the add button in figure 4-96 to go to the access control page in the screen as shown in figure 4-97. 2. Enter the ip address (e.G. 192.168.1.23) you want to add in the ip address f...

  • Page 83

    Ib-wra150n 150m wireless-n adsl2+ router - user guide figure 4-98 4.10.7 firmware upgrade choose “system tools/maintenance→ firmware upgrade”, you can see the screen (shown in figure 4-99) which allows you to upgrade the latest version software to keep the router up to date. Figure 4-99 ¾ browse: cl...

  • Page 84

    Ib-wra150n 150m wireless-n adsl2+ router - user guide 3. Click the firmware upgrade button. ) note: 1) there is no need to upgrade the firmware unless the new firmware has a new feature you want to use. However, when experiencing problems caused by the router itself, you can try to upgrade the firmw...

  • Page 85: Appendix A: Faq

    Ib-wra150n 150m wireless-n adsl2+ router - user guide appendix a: faq 1. How do i configure the router to access internet by adsl users? 1) first, configure the adsl modem configured in rfc1483 bridge model. 2) connect the ethernet cable from your adsl modem to the wan port on the router. The teleph...

  • Page 86

    Ib-wra150n 150m wireless-n adsl2+ router - user guide appendix b: configuring the pc in this section, we’ll introduce how to install and configure the tcp/ip correctly in windows xp. First make sure your ethernet adapter is working, refer to the adapter’s manual if necessary. 1. Configure tcp/ip com...

  • Page 87

    Ib-wra150n 150m wireless-n adsl2+ router - user guide 5) the following tcp/ip properties window will display and the ip address tab is open on this window by default. Now you have two ways to configure the tcp/ip protocol below: ¾ setting ip address automatically select obtain an ip address automati...

  • Page 88

    Ib-wra150n 150m wireless-n adsl2+ router - user guide figure 0-4 now: click ok to keep your settings. 83.

  • Page 89: Appendix C: Specifications

    Ib-wra150n 150m wireless-n adsl2+ router - user guide appendix c: specifications general standards ansi t1.413, itu g.992.1, itu g.992.2, itu g.992.3, itu g.992.5, ieee 802.3, ieee 802.3u, ieee 802.11b , ieee 802.11g , 802.11n protocols tcp/ip, ipoa , pppoa , pppoe, sntp, http, dhcp, icmp, nat lan p...

  • Page 90: Appendix D: Glossary

    Ib-wra150n 150m wireless-n adsl2+ router - user guide appendix d: glossary ¾ 802.11n - 802.11n builds upon previous 802.11 standards by adding mimo (multiple-input multiple-output). Mimo uses multiple transmitter and receiver antennas to allow for increased data throughput via spatial multiplexing a...

  • Page 91

    Ib-wra150n 150m wireless-n adsl2+ router - user guide ¾ dns (domain name server) - the ip address of your isp's server, which translates the names of websites into ip addresses. ¾ domain - a specific name for a network of computers. ¾ dsl (digital subscriber line) - an always-on broadband connection...

  • Page 92

    Ib-wra150n 150m wireless-n adsl2+ router - user guide ¾ network - a series of computers or devices connected for the purpose of data sharing, storage, and/or transmission between users. ¾ ping (packet internet groper) - an internet utility used to determine whether a particular ip address is online....

  • Page 93

    Ib-wra150n 150m wireless-n adsl2+ router - user guide ¾ udp (user datagram protocol) - a network protocol for transmitting data that does not require acknowledgement from the recipient of the data that is sent. ¾ vci (virtual channel identifier) - the identifier of the vc contained in the atm cell h...