IBall Baton iB-WVG300N User Manual - page 50
Manual is about: VDSL2 Gateway Router
of
126
VDSL2 Gateway Router
42
Step9
In this page, you can obtain the DNS server addresses from the selected
WAN interface. After finishing setting, click Next to display the following
page.
Step10 In this page, it displays the information about the IPoA settngs. Click
Apply/Save to save and apply the settings. You can modify the settings
by clicking the Back button if necessary.
6.2.2.5 Adding a Bridge WAN service
This section describes the steps for adding the Bridge WAN service.
Step1
In the Wide Area Network (WAN) Service Setup page, click the Add
button to display the following page. (At first, you must add a proper ATM
or PTM interface for this WAN service.) Click the Add button to display
the following page.