Ibanez EPP400 Owner's Manual - Rear Panel Description
5
Rear Panel Description
23. INPUT 1 Jack
The INPUT 1 jack accepts a standard ¼” mono phono plug such as those found
on standard guitar cords. When INPUT 2 is activated (see item 24), INPUT 1 is
inactive.
24. INPUT 2 Jack
The INPUT 2 jack accepts a standard ¼” mono phono plug such as those found
on standard guitar cords. When INPUT 1 is activated (see item 23), INPUT 2 is
inactive.
25. LOOP 1 SEND Jack
The LOOP 1 SEND jack accepts a standard ¼” mono phono plug and is
connected to the input of the effects processor to be placed in loop 1.
26. LOOP 1 RECEIVE Jack
The LOOP 1 RECEIVE jack accepts a standard ¼” mono phono plug and is
connected to the output of the effects processor to be placed in loop 1.
27. LOOP 2 SEND Jack
The LOOP 2 SEND jack accepts a standard ¼” mono phono plug and is
connected to the input of the effects processor to be placed in loop 2.
28. LOOP 2 RECEIVE Jack
The LOOP 2 RECEIVE jack accepts a standard ¼” mono phono plug and is
connected to the output of the effects processor to be placed in loop 2.
29. LOOP 3 SEND Jack
The LOOP 3 SEND jack accepts a standard ¼” mono phono plug and is
connected to the input of the effects processor to be placed in loop 3.
30. LOOP 3 RECEIVE Jack