Ibanez EPP400 Owner's Manual - page 13
6
The LOOP 3 RECEIVE jack accepts a standard ¼” mono phono plug and is
connected to the first output of the effects processor to be placed in loop 3.
31. LOOP 3 SUB RCV Jack
The LOOP 3 SUB RCV jack accepts a standard ¼” mono phono plug and is
connected to the second (stereo) output of the effects processor to be placed in
loop 3.
32. LOOP 4 SEND Jack
The LOOP 4 SEND jack accepts a standard ¼” mono phono plug and is
connected to the input of the effects processor to be placed in loop 4.
33. LOOP 4 RECEIVE Jack
The LOOP 4 RECEIVE jack accepts a standard ¼” mono phono plug and is
connected to the first output of the effects processor to be placed in loop 4.
34. LOOP 4 SUB RCV Jack
The LOOP 4 SUB RCV jack accepts a standard ¼” mono phono plug and is
connected to the second (stereo) output of the effects processor to be placed in
loop 4.
35. LOOP 5 SEND Jack
The LOOP 5 SEND jack accepts a standard ¼” mono phono plug and is
connected to the input of the effects processor to be placed in loop 5.
36. LOOP 5 RECEIVE Jack
The LOOP 5 RECEIVE jack accepts a standard ¼” mono phono plug and is
connected to the first output of the effects processor to be placed in loop 5.
37. LOOP 5 SUB RCV Jack
The LOOP 5 SUB RCV jack accepts a standard ¼” mono phono plug and is
connected to the second (stereo) output of the effects processor to be placed in
loop 5.
NOTE: For more information about effects processor hookup and the “loop”
concept, refer to section 3 of Application Notes
38. MAIN 1 Output Jack
The MAIN 1 output jack accepts a standard ¼” mono phono plug. Connect
MAIN 1 output to an amplifier or a downstream processor. When MAIN 2 output
is activated (see item 39), MAIN 1 output is inactive.
39. MAIN 2 Output Jack
The MAIN 2 output jack accepts a standard ¼” mono phono plug. Connect
MAIN 2 output to an amplifier or a downstream processor. When MAIN 1 output
is activated (see item 38), MAIN 2 output is inactive.