Ibanez troubadour T150S Owner's Manual - page 9
7
EN
G
LI
SH
Names and Function on Each Part
1.POWERLED:ThisLEDwilllightwhenamppowerisactivatedby
the power switch.
2.INPUT LEVEL: Switches the signal level from MIC INPUT, line
level or mic level.
3. PHANTOM ON/OFF: Switches the phantom power ON/OFF. The
phantom power can supply +15V for T80N / +48V for T150S to
your capacitor microphone that connects with MIC INPUT. When
youusethisswitch,turndowntheVOLUMEto0.
4. INST. INPUT: 1/4” phone jack input.*
1
5.MIC INPUT: Balanced input terminal with XLR Jack. 1-GND,
2-HOT,3-COLD.*
1
6.CLIPINDICATOR:WhenthisLEDisilluminatedinred,thepre-
ampisclipping.ItisbetterforcleansoundtoturndowntheVOL-
UME.*
1
7.VOLUME:Controlsthepre-amplifierlevel.*
1
8. 3 BAND EQ: Refer to the spec sheet at the end of this manual for
frequencies and levels.*
1
9. CHORUS: Controls the speed of the chorus effect. Turn this con-
troltotherighttoincreasethespeed.Thisfunctionwillbeoffat“0”
position.*
1
10.REVERB:Controlsthereverblevel.Thisfunctionwillbeoffat“0”
position.*
1
11.NOTCHFILTER:Thisisanotchfilterthatreducesfeedback.Turn
thiscontroluntilfeedbackstops.Thisfunctionwillbeoffat“0”posi-
tion.*
2
12. MASTER: Controls the overall output level of the amplifier. This
doesnotadjusttheleveloftheLINEOUTandAUXINsignal.
13.PHASEINVERT:Invertsthephaseofthesignal.Thishelpsyou
stop feedback.*
2
14. MUTE: Mutes the singal from MIC INPUT and INST. INPUT. When
mutedtheLEDwilllight.ThiswillnotmutetheLINEOUTandAUX
IN signal.
15. PHONES: 3.5mm stereo mini output jack for stereo headphones.
The sound is not reproduced through the built-in speaker when
headphonesareinuse.TheLINEOUTsignalwillstillproduceout-
put.
Warning:
This phones output can produce lots of volume. Ensure that the
MASTERandAUXVOLUMEhasbeenturneddownbeforebegin-
ning to play using the headphones, and then slowly increase the
volume until it has reached the desired level. Note inserting or re-
moving headphones at high volume levels may result in damage to
the headphones and to the user’s hearing.
16. AUX IN: 3.5mm stereo mini jack. This jack is designed to be con-
nected to the headphone output of a portable CD or MP3 player, or
similar device. Use the volume control of your portable player along
with the volume control on the amp to adjust the desired volume.
17.AUXVOLUME:ControlsthesignalleveloftheAUXINPUT.
18.LINEOUT:Monaural1/4”phonejackwithalineleveloutput.You
can connect to an external mixing console or similar equipment.
REVERBandCHORUSsignalareoutputinstereo.
19. FOOTSWITCH INPUT: Footswitch (sold separately) can be con-
nected here. A : Channel 1 Chorus / Reverb, B : Channel 2 Chorus /
Reverb, C : Mute / Phase Invert / Notch Filter
20. AC INPUT: Connect the included AC power cable to this connec-
tor. Only use the voltage indicated on the panel.
21. POWER SWITCH: This switch turns the power on/off. When you
are not using the amp, please leave it turned off.
22.TILTUPBAR:Thebuilt-intiltsystemallowsforbettermonitoring.
23.SPEAKERSTANDHOLE:
Φ38mm speaker stand adaptor (Only
T150S)
*
1
: The function works in each channel independently.
*
2
: The function might not work perfectly in all situations.